Extrusion, Single Screw (moderated by Steve H, FSD Admin, TomBlack, Tom C)
|
 Plastic processing forums for extrusion information and advice and for other feed screw applications.
 Extrusion, Single Screw
profile | register | preferences | faq | search
|
|
New Topics: All registered users may post new topics in this forum. Replies: All registered users may post replies in this forum. |
| Topic | Topic Starter | Replies | Last Post | ||
 |
 |
PP DIE | Antony | 2 | November 29, 2010 09:06 AM |
 |
|
surging | sid | 7 | November 17, 2010 12:39 AM |
|
|
|
apet extrusion | jefost8 | 0 | October 12, 2010 01:26 PM |
|
|
 |
100% pe no pressure | novadan | 3 | August 18, 2010 08:32 PM |
|
|
|
Voids in PET extrudate | Strapping God | 5 | August 12, 2010 02:45 PM |
|
|
|
PE Foam Extrusion | Vic | 10 | August 09, 2010 09:09 AM |
|
|
|
pe extrusion, screw type | novadan | 5 | August 04, 2010 08:32 PM |
|
|
|
problems with flood feed | fgt | 3 | June 17, 2010 03:53 PM |
|
|
|
problems with flood feed | fgt | 0 | June 17, 2010 01:44 PM |
|
|
|
Extrusion crosshead and tooling design | chrishang | 1 | May 16, 2010 06:10 AM |
|
|
|
Segments of single screw | sangitafood | 6 | May 12, 2010 09:12 AM |
|
|
|
What to do with coextruded PET/PETG | vmping | 3 | May 05, 2010 02:21 PM |
|
|
|
Marketing guys and the Pseudo-Science of "Green" | Tom C | 0 | March 09, 2010 04:56 PM |
|
|
|
Vacuum skin blow film bags | Cal | 2 | February 17, 2010 08:02 AM |
|
|
|
die builup | novadan | 3 | February 16, 2010 06:34 AM |
|
|
|
PRESSURE FLUCTUATIONS | novadan | 26 | February 10, 2010 11:30 AM |
|
|
|
1" extruder running either Pebax or nylon with screw bridging | peterturk | 8 | February 10, 2010 11:09 AM |
|
|
|
Tie layer bonding | peterturk | 3 | February 02, 2010 06:15 PM |
|
|
|
Polar and non polar materials | novadan | 1 | January 05, 2010 01:33 PM |
|
|
|
stretching PE | novadan | 2 | December 18, 2009 03:51 PM |
|
|
|
HLMI | novadan | 1 | November 30, 2009 03:16 PM |
|
|
|
stretching PE | novadan | 0 | October 21, 2009 10:52 AM |
|
|
|
Single Screw Extrusion Simulation | eponge21 | 4 | October 19, 2009 04:03 PM |
|
|
|
how to calculate screw torque | jmgonnet | 1 | October 19, 2009 08:41 AM |
|
|
 |
Plastic Extrusion Calculator | nick p | 1 | October 02, 2009 08:56 AM |
|
|
|
New extrusion tech & PVDF | novadan | 5 | September 16, 2009 04:10 PM |
|
|
|
Copolymer vs. Homopolymer PP | Tom C | 4 | September 15, 2009 03:03 PM |
|
|
|
Silicone slip additives | alanb | 0 | August 31, 2009 08:55 PM |
|
|
|
PET screw 2 | seref | 5 | August 18, 2009 06:56 PM |
|
|
|
hot face pelletizing | Otis | 2 | August 14, 2009 02:59 AM |
|
|
|
Extuding PP, sheet | awan | 10 | August 12, 2009 04:36 PM |
|
|
|
nylon 6 skips and rough surface | Makeit Work | 3 | July 24, 2009 09:04 PM |
|
|
|
melt transport in extruder vent section | g.weigerstorfer@erema.at | 5 | July 16, 2009 10:15 PM |
|
|
|
melt transport in extruder vent section | g.weigerstorfer@erema.at | 0 | June 18, 2009 01:51 AM |
|
|
|
Trouble shooting MD orientation | awan | 5 | May 29, 2009 04:04 PM |
|
|
|
Gel formation | Cisco | 7 | May 21, 2009 03:36 PM |
|
|
|
Medical Tube Extrusion | ronvieky | 2 | April 26, 2009 04:10 PM |
|
|
|
coextrusion with nylon 6 | Makeit Work | 1 | January 08, 2009 03:13 PM |
|
|
|
Cleaning TPU extrusion dies | jgaver | 1 | July 28, 2008 03:51 PM |
|
|
|
New and improved extrusion rate calculator | Tom C | 4 | June 26, 2008 10:40 AM |
|
|
|
Die designer needed | glen591 | 1 | May 26, 2008 10:59 AM |
|
|
|
Energy Savings for Extruders and Downstream | merscher | 4 | March 19, 2008 08:39 AM |
|
|
|
Pebax processing | Plank | 3 | March 01, 2008 01:46 PM |
|
|
|
dynisco controller/pid settings | paddy66 | 4 | February 06, 2008 07:46 PM |
|
|
|
Cooling System for Chrome roll stack | Allan | 4 | January 22, 2008 04:28 AM |
|
|
|
how to best use process data to improve my extrusion? | greg | 1 | January 16, 2008 04:31 PM |
|
|
|
PVC Extrusion over Copper Tube | TYCOTOMMY | 1 | January 08, 2008 10:58 AM |
|
|
|
purging between Nylon12 and TPU's | jgaver | 2 | December 12, 2007 09:09 AM |
|
|
|
Aplications Blend PET/HDPE for Extrusion Rafia and Pipe | prodab | 1 | November 30, 2007 01:18 PM |
|
|
|
Extrusion Tooling | alanv | 1 | November 08, 2007 12:51 PM |
|
|
|
Reducing cost for plastic bag production | Ashamery | 1 | November 02, 2007 09:20 PM |
|
|
|
K-Show | Steve H | 0 | October 05, 2007 04:16 PM |
|
|
|
FBM Recycling Equipment | Steve H | 0 | October 03, 2007 03:29 PM |
|
|
|
Tungstun carbide | Allan | 1 | October 02, 2007 02:42 PM |
|
|
|
Extrusion control and monitoring system evolution | rawelk | 14 | September 24, 2007 12:08 AM |
|
|
|
looking for a better mix. | mademan5284 | 4 | September 23, 2007 05:55 PM |
|
|
|
machine for wide tacky film | yori | 0 | September 10, 2007 08:54 AM |
|
|
|
Single Screw Control | XtruDR | 1 | September 08, 2007 09:58 AM |
|
|
|
Material coming out of vent port | Mazad Khan | 4 | September 04, 2007 07:44 AM |
|
|
|
Cloudy PETG | vmping | 2 | August 23, 2007 07:50 AM |
|
|
|
Register | louis33 | 4 | August 15, 2007 01:52 PM |
|
|
|
direct injection of butane into extruder | NORSHELL | 7 | August 03, 2007 09:18 PM |
|
|
|
Anyone happy with their screen changers? | rterry | 2 | August 03, 2007 04:43 AM |
|
|
|
Chrome rolls | Allan | 2 | August 02, 2007 09:40 PM |
|
|
|
Do you have a feed screw wear problem | ExtremeCoatings | 1 | July 26, 2007 06:40 PM |
|
|
|
extruder gearbox | uwit | 4 | July 26, 2007 06:34 PM |
|
|
|
LDPE Film | Linear low | 0 | July 19, 2007 11:05 AM |
|
|
|
Bench Mark Your Energy Efficiency | Steve H | 0 | July 18, 2007 05:27 AM |
|
|
|
welex 4.5 pet extrusion line | curiousgeorge | 14 | July 17, 2007 09:32 AM |
|
|
|
Advances in pressure recording | AlexK | 4 | July 11, 2007 01:54 PM |
|
|
|
Fill Material | polymerguy | 3 | June 29, 2007 11:18 AM |
|
|
|
Compression Ratio | bighead | 4 | June 29, 2007 09:27 AM |
|
|
|
L/D ratio question | dullkid | 4 | June 28, 2007 11:41 AM |
|
|
|
AWG 48 and 50 | polymerguy | 0 | June 20, 2007 02:38 PM |
|
|
|
Wide Spec Material Behavior | Shailesh | 3 | June 12, 2007 09:45 PM |
|
|
|
Web Based Intro to Plastics & Polymer Processing | Steve H | 0 | June 08, 2007 06:37 AM |
|
|
|
POM-C heavy section solid profile extrusion | peters_a | 10 | May 30, 2007 09:52 AM |
|
|
|
Silicone with Talcum | polymerguy | 3 | May 24, 2007 06:51 PM |
|
|
|
Stickiness of Thermoplastic | polymerguy | 2 | May 24, 2007 02:57 PM |
|
|
|
Pressure probe calibration | rawelk | 16 | May 16, 2007 10:17 PM |
|
|
|
Air Traps in Closed Cell Foam | equate0404 | 1 | May 09, 2007 10:24 PM |
|
|
 |
Voids - Single Screw Extrusion - Rubber | equate0404 | 4 | May 09, 2007 10:15 AM |
|
|
|
bead breathing or washing | Allan | 44 | April 15, 2007 11:35 PM |
|
|
|
Sizing tanks | jgaver | 0 | April 12, 2007 03:46 PM |
|
|
|
Thick Hips Sheet- STREAKS | JamieMadronich | 10 | April 05, 2007 05:12 PM |
|
|
|
grilamid processing issues | paddy66 | 7 | March 27, 2007 03:01 PM |
|
|
|
Peek | mademan5284 | 2 | March 23, 2007 03:41 AM |
|
|
|
Gas injection into extruders | irish | 10 | March 15, 2007 04:11 AM |
|
|
|
New Material wanted | polymerguy | 1 | March 08, 2007 05:33 AM |
|
|
|
PUR Extrusion | polymerguy | 1 | March 06, 2007 03:41 PM |
|
|
 |
4mm solid tube | alanv | 4 | March 01, 2007 09:10 PM |
|
|
|
Extruding ABS | shawn8791 | 5 | February 19, 2007 11:41 AM |
|
|
|
Indentation on sheet | Mazad Khan | 2 | January 12, 2007 09:06 PM |
|
|
|
Barrel heater plumbing | rawelk | 13 | December 30, 2006 06:56 PM |
|
|
|
RANDCASTLE EXTRUSION SYSTEMS, INC | Casey H | 5 | December 07, 2006 07:58 AM |
|
|
|
Pressure Sensors | jgaver | 2 | October 30, 2006 10:40 AM |
|
|
|
Injection screw design for PC low grade | P.C.Cas | 5 | October 27, 2006 07:13 PM |
|
|
|
Temp. profiles HMWPE, gp SCREW | Returning Vet | 2 | September 19, 2006 04:56 PM |
|
|
|
sticks to surface | aivar | 7 | September 12, 2006 01:31 AM |
|
|
 |
Machinery to make cartrides of hot mealt? | pegaking | 0 | August 31, 2006 12:38 PM |
|
|
|
compression ratio for extruding ASA | logrjige | 8 | August 30, 2006 03:45 PM |
|
|
|
Screw play | bobfoam | 4 | August 25, 2006 05:09 PM |
|
|
|
SPE book for understanding melting process | Philco | 3 | August 24, 2006 11:58 AM |
|
|
|
rebuilt screw and barril | GSegura | 2 | August 23, 2006 01:43 PM |
|
|
|
Screw supplier | sammyk | 2 | August 23, 2006 01:38 PM |
|
|
|
silicon extrusion | clive | 4 | August 22, 2006 10:29 AM |
|
|
|
Brand New Member Who Needs Help | billz | 9 | August 20, 2006 10:26 AM |
|
|
 |
Sliding screw | mademan5284 | 1 | August 14, 2006 08:57 AM |
|
|
|
extruding pet/hdpe blend | pedro viana | 3 | July 31, 2006 08:30 PM |
|
|
|
maximume shear stress on shaft iclude flight | magnoo | 1 | July 31, 2006 09:29 AM |
|
|
|
screw rpm | john | 2 | July 25, 2006 10:29 PM |
|
|
|
Foam Extrusion | sachinsharma | 4 | July 21, 2006 04:30 PM |
|
|
|
Sheet issues | Mazad Khan | 10 | July 03, 2006 08:44 AM |
|
|
|
Using Pellets instead of frac melt regrind | aarondenise | 5 | June 21, 2006 07:45 AM |
|
|
|
Training videos for extrusion | pki pipe | 3 | June 18, 2006 08:32 PM |
|
|
|
Tube tools | sammyk | 1 | June 17, 2006 10:25 PM |
|
|
|
Film Extruder Design | isrealdvd | 2 | June 17, 2006 10:23 PM |
|
|
|
extruder ouput | john | 2 | June 16, 2006 01:16 PM |
|
|
|
technical drawing of single screw and barrel | Aga | 2 | June 07, 2006 10:22 AM |
|
|
 |
pet sheet extrusion need help | aliguven | 15 | June 07, 2006 07:20 AM |
|
|
|
Extruder Feeder for LD | Gray Dick | 4 | June 05, 2006 09:27 AM |
|
|
|
Repro material usage low | Casey H | 2 | May 08, 2006 02:06 PM |
|
|
|
Melt pump | john green | 5 | May 04, 2006 07:17 AM |
|
|
|
running pp 10in 35ft extruder | glennf | 2 | April 13, 2006 08:50 PM |
|
|
|
compression ratio | charles | 5 | April 04, 2006 08:04 PM |
|
|
|
broken screw | aheadofthegame | 7 | March 31, 2006 09:28 AM |
|
|
|
information single screw extruder food industry | laet | 5 | March 29, 2006 07:52 AM |
|
|
|
polyester strapping line | shland | 0 | March 29, 2006 02:00 AM |
|
|
|
Sample Design Calculation for Single Screw EXtruders | Alex Afkhami | 1 | March 26, 2006 03:25 PM |
|
|
|
screw cooling | john | 2 | March 21, 2006 09:38 PM |
|
|
|
RKC TCS™ barrel heat/cool system | rawelk | 1 | March 16, 2006 03:01 PM |
|
|
|
the control of single screw extruder | magnoo | 1 | March 04, 2006 09:58 AM |
|
|
|
Dichloromethane test on PVC | johne | 1 | February 28, 2006 10:37 AM |
|
|
|
Extruder feed problem | felix | 15 | February 27, 2006 05:31 PM |
|
|
|
post-consumer HDPE/PP blend | gllemoine | 1 | February 17, 2006 05:00 PM |
|
|
|
Bone Cravens | ender | 2 | February 06, 2006 08:56 AM |
|
|
|
plate out | john | 0 | February 04, 2006 10:28 AM |
|
|
|
shrink film testing | gllemoine | 0 | February 03, 2006 10:30 AM |
|
|
|
estimating power requirements | Alfredo | 10 | January 30, 2006 08:26 AM |
|
|
|
off grade material | john green | 2 | January 30, 2006 04:37 AM |
|
|
|
Prevent waviness | walterzj | 8 | January 30, 2006 12:43 AM |
|
|
|
texin resin | john | 2 | January 30, 2006 12:31 AM |
|
|
|
Turning HDPE milkjugs into T-Shirt bags? | russellburrows | 1 | January 30, 2006 12:15 AM |
|
|
|
calculation of hp & rpm of the motor | magnoo | 1 | January 29, 2006 02:05 PM |
|
|
|
extruder pulling to many AMPS and fear of blockage in the barrel | robert klaasen | 2 | January 25, 2006 02:50 AM |
|
|
|
design of single scre extruder plastic machine | magnoo | 0 | January 22, 2006 12:28 AM |
|
|
|
Unstable Process | amauri | 1 | January 20, 2006 08:58 AM |
|
|
|
Temperatures profile | Faria | 0 | January 20, 2006 07:03 AM |
|
|
|
Loss of feed | hechaniz | 10 | January 15, 2006 01:27 PM |
|
|
|
petg | dano | 2 | January 07, 2006 02:36 PM |
|
|
|
Calcium Carbonate /talc in PP flat tape for making ropes | esskayplastics | 0 | January 05, 2006 11:22 PM |
|
|
|
Feed Back On Erema Equipment | Steve H | 0 | December 30, 2005 01:40 PM |
|
|
|
Need solution | pyro | 4 | December 30, 2005 01:23 PM |
|
|
|
Senior Process Engineer - Job Oppty in Los Angeles area | barusiec | 0 | December 29, 2005 01:30 PM |
|
|
|
Polycarbonate Processing | jBickett | 5 | December 15, 2005 11:21 AM |
|
|
|
Sizing rings, tools | mademan5284 | 2 | December 15, 2005 10:57 AM |
|
|
|
die design | john | 1 | December 10, 2005 09:50 AM |
|
|
|
extrusion help! | Jessica | 1 | December 10, 2005 09:45 AM |
|
|
|
Cause of extrusion instability | greg.barnes | 8 | December 07, 2005 02:34 PM |
|
|
|
Surface Finish for Melt Pipes and Dies | Bob Cunningham | 8 | November 27, 2005 09:37 AM |
|
|
|
Temp profile extruder/screener/piping | fkalten | 5 | November 25, 2005 08:56 AM |
|
|
|
Dbl flight in conveying zone | JMG | 1 | November 24, 2005 09:20 AM |
|
|
|
Making tubes out of zytel | rnb | 6 | November 22, 2005 05:25 PM |
|
|
|
purge | john | 2 | November 17, 2005 11:52 AM |
|
|
|
please help me!!! | osopadilla | 1 | November 17, 2005 11:34 AM |
|
|
|
Hey Louis 33 | mademan5284 | 5 | November 16, 2005 11:26 PM |
|
|
|
Pebax Extrusion Problems | Technosavy | 6 | November 16, 2005 11:20 PM |
|
|
|
Die Cleaning Methods | dinne | 0 | November 11, 2005 06:22 PM |
|
|
|
POLYPROP EXTRUSION | john green | 6 | November 10, 2005 12:04 PM |
|
|
 |
PP Extrusion | tuckerjr | 2 | November 10, 2005 09:48 AM |
|
|
|
extrusion problem | luizamal | 13 | November 10, 2005 08:31 AM |
|
|
|
Surging | yori | 9 | October 24, 2005 10:33 AM |
|
|
|
Barrel/Screw ware | Casey H | 1 | October 23, 2005 03:52 PM |
|
|
|
Stringers in in virgin poly resin | Stokes | 4 | October 14, 2005 10:12 AM |
|
|
|
Lightweight Polypropylene | mademan5284 | 14 | October 11, 2005 01:11 PM |
|
|
|
Extruding ability | jasonbae | 2 | October 09, 2005 03:44 PM |
|
|
|
Calcium carbonate | Rei | 4 | October 09, 2005 08:04 AM |
|
|
|
Benefits Bulk Pellets Vs.Bulk Powders? | Stokes | 1 | October 06, 2005 09:31 PM |
|
|
|
orientation in extrusion | Rei | 2 | October 05, 2005 09:02 PM |
|
|
|
PLA | jackie | 7 | October 05, 2005 10:39 AM |
|
|
|
MEAT EXTRUSION | marcos fraiha | 15 | October 05, 2005 09:50 AM |
|
|
|
PP mixing with HMHDPE | esskayplastics | 0 | October 02, 2005 08:00 AM |
|
|
|
air ring design - ldpe vs. hdpe | charliehagee | 1 | September 25, 2005 07:22 AM |
|
|
|
rebuild screw or build new screw | lily72ca | 4 | September 21, 2005 08:21 AM |
|
|
|
Anyone have Fep experience | mademan5284 | 8 | September 17, 2005 06:32 PM |
|
|
|
machine for sale | john green | 0 | September 14, 2005 11:54 AM |
|
|
|
Blown film cooling | Dock | 0 | September 14, 2005 02:17 AM |
|
|
|
screen packs | charles | 2 | September 14, 2005 02:10 AM |
|
|
|
Reversion/Orientation | swickham | 2 | September 09, 2005 03:57 PM |
|
|
|
recycling | john green | 7 | September 09, 2005 03:44 PM |
|
|
 |
Used Screws For Recycle Plant | BrianAndLiz | 2 | September 08, 2005 12:09 PM |
|
|
|
bubble cooling problem | sarswati | 1 | August 30, 2005 05:00 AM |
|
|
|
air bubble in a rod | john | 2 | August 29, 2005 08:07 AM |
|
|
|
Purging Extruder With A Melt Pump | Steve H | 9 | August 26, 2005 01:30 AM |
|
|
|
Sizing plates Sizing rings | mademan5284 | 0 | August 25, 2005 11:59 AM |
|
|
|
insulating t/dies single screw extruders | john green | 6 | August 25, 2005 09:55 AM |
|
|
|
Shear or friction heat | Xanstarr | 8 | August 22, 2005 08:28 PM |
|
|
|
Web Thickness | hsachi | 4 | August 16, 2005 04:40 PM |
|
|
|
how to increase output | sambath597 | 1 | August 12, 2005 08:29 AM |
|
|
|
barrel wear | gllemoine | 1 | August 03, 2005 04:12 PM |
|
|
|
pebble finish hdpe | sammyk | 2 | August 03, 2005 09:29 AM |
|
|
|
Barrel Cleaning | Veronica | 3 | August 02, 2005 10:38 AM |
|
|
|
Output versus film quality (physical properties) | kk | 2 | July 28, 2005 11:08 PM |
|
|
|
heat loss | alanv | 3 | July 25, 2005 09:56 PM |
|
|
|
Barrel heater cooling strategies | rawelk | 35 | July 24, 2005 03:44 PM |
|
|
|
Recycle LDPE FOAM Waste | jigna | 0 | July 23, 2005 11:40 PM |
|
|
|
Choosing an extruder and/or screw | Harold | 1 | July 19, 2005 03:55 PM |
|
|
|
Choosing an extruder and/or screw | Harold | 0 | July 19, 2005 03:21 PM |
|
|
|
extrusion | mittul143 | 8 | July 19, 2005 06:48 AM |
|
|
|
Polyflow convert file problem | kimo | 1 | July 18, 2005 12:01 AM |
|
|
|
Info needed | Livonius A | 1 | July 15, 2005 09:24 AM |
|
|
|
LDPE Foam recycling waste | jigna | 0 | July 15, 2005 08:02 AM |
|
|
|
Solid HDPE Extrusion | alanv | 6 | July 13, 2005 12:13 PM |
|
|
|
Extrusion Rate Calculator | Tom C | 3 | July 06, 2005 07:32 PM |
|
|
|
Vent Blockage | swickham | 19 | June 28, 2005 03:51 AM |
|
|
|
Plastics Engineering May 2005 | louis33 | 5 | June 28, 2005 12:03 AM |
|
|
|
LDPE Extruder pelletizing | jitendra purwar | 1 | June 26, 2005 09:21 PM |
|
|
|
sticky pet | sammyk | 2 | June 07, 2005 10:16 AM |
|
|
|
tie layer cosmetics | mitch | 3 | June 02, 2005 09:04 AM |
|
|
|
Die design for 4 ft by 8 ft Wood-plastics composite sheet line | rickyconanan | 1 | May 22, 2005 07:40 PM |
|
|
|
HDPE Tube Dies | alanv | 0 | May 18, 2005 04:23 PM |
|
|
|
idler roll adjustment | gllemoine | 3 | May 17, 2005 09:29 AM |
|
|
|
High quality, Medical Grade tubing | medicalguy | 1 | May 16, 2005 11:51 AM |
|
|
|
Film property and processing | kk | 1 | May 16, 2005 11:49 AM |
|
|
|
HDPE v MDPE | alanv | 1 | May 12, 2005 08:57 PM |
|
|
|
sizing die | alanv | 3 | May 12, 2005 09:12 AM |
|
|
|
PET Slip Agent "WaNtEd" urgent! | Polymer Guy | 4 | May 11, 2005 09:51 AM |
|
|
|
Wave Screws | Tom C | 7 | May 05, 2005 03:24 PM |
|
|
|
Extruder Screw Design for PP/talc | chuckmo | 5 | April 27, 2005 11:00 AM |
|
|
|
Polyethylene vs Polypropylene | shayne31 | 2 | April 27, 2005 10:51 AM |
|
|
|
Polypro Surface Defects | Justin7 | 8 | April 24, 2005 03:29 PM |
|
|
|
HDPE Tube extrusion faults | alanv | 10 | April 24, 2005 03:16 PM |
|
|
|
Stages in Extrusion | antonio75 | 1 | April 21, 2005 09:51 AM |
|
|
|
PolyPro( A real Pain | Coronadrinker | 3 | April 20, 2005 08:17 AM |
|
|
|
Slip Agent | Polymer Guy | 1 | April 06, 2005 06:22 PM |
|
|
|
Purging compounds | kemper | 6 | April 06, 2005 10:56 AM |
|
|
|
Screw design | egardezi77 | 3 | April 01, 2005 11:16 AM |
|
|
|
PET and vacuum venting zone | bogsav | 1 | March 27, 2005 07:04 PM |
|
|
|
Gels Caused by Re-processed PE | RBaratt | 2 | March 26, 2005 07:33 PM |
|
|
|
new machine | pat | 5 | March 26, 2005 05:08 PM |
|
|
|
PET Flakes Screw Design | Vipul | 7 | March 21, 2005 10:02 PM |
|
|
|
High Pressure problem | ac1 | 2 | March 19, 2005 06:12 PM |
|
|
|
Extruding HDPE | satha | 7 | March 15, 2005 12:57 AM |
|
|
|
Hot melt adhesives | Rick Liu | 0 | March 12, 2005 05:50 PM |
|
|
|
HPM Prodex 2" single screw extruder | Chas | 0 | March 04, 2005 02:50 PM |
|
|
|
Machine Selection | louis33 | 6 | February 25, 2005 02:00 PM |
|
|
|
Silicone Extruder | Edgetech | 1 | February 22, 2005 12:28 PM |
|
|
|
Center burn line in Acetal | Doctor | 2 | February 21, 2005 03:58 PM |
|
|
|
Parallel vs. Conical ? | Serdar | 1 | February 21, 2005 10:52 AM |
|
|
|
Reprocessing HDPE with EVOH | sbromm | 11 | February 20, 2005 05:57 PM |
|
|
|
mixing screws | Dominicanao | 3 | February 19, 2005 09:23 AM |
|
|
|
Barrel temp. Optimization | RBaratt | 1 | February 15, 2005 03:03 PM |
|
|
|
double venting extruder. | Guy S | 3 | February 14, 2005 04:50 PM |
|
|
|
Cutter Puller encoder problem | hank05 | 9 | February 11, 2005 05:12 PM |
|
|
|
antimicrobial additives for PE film | gllemoine | 1 | February 11, 2005 01:49 PM |
|
|
|
Seek Side by Side Bicompnt Tape Die/Man | BRUSHMAN | 2 | February 08, 2005 09:44 AM |
|
|
|
PITCH TYPES IN FEEDSCREWS | karthish | 0 | February 08, 2005 04:55 AM |
|
|
|
film extrusion optimisation | gllemoine | 6 | February 07, 2005 08:39 AM |
|
|
|
Processing powders | gbrown@kaf-techmail.com | 3 | February 03, 2005 05:47 AM |
|
|
|
Motorized Crosshead | samin | 1 | February 02, 2005 09:39 AM |
|
|
|
artificial grass | esskayplastics | 2 | January 28, 2005 12:32 PM |
|
|
|
Extrusion of PET monofilaments | abathen | 1 | January 24, 2005 08:56 PM |
|
|
|
Looking for a Process Engineer C. E. | ezrailson | 1 | January 23, 2005 02:03 PM |
|
|
|
PET formula and temps | abathen | 1 | January 20, 2005 09:40 PM |
|
|
|
barrier with PET and PP? | seref | 1 | January 19, 2005 02:19 PM |
|
|
|
Extruder using air to heat extruder | Maximus | 1 | January 18, 2005 01:48 PM |
|
|
|
SCREW GEOMETRY FOR WOOD COMPOSITES | ALI GARDEZI | 1 | January 18, 2005 07:45 AM |
|
|
|
PET screw design | seref | 1 | January 18, 2005 07:39 AM |
|
|
|
extrusion of PA11 and PA46 | noel | 0 | January 17, 2005 11:53 AM |
|
|
|
Puller Rod | James A | 0 | January 16, 2005 09:28 PM |
|
|
|
NR vented screw design | Gary M | 4 | January 14, 2005 07:38 PM |
|
|
|
Extrusion method and speed for FPVC tube/hose | lily72ca | 0 | January 13, 2005 08:03 PM |
|
|
 |
Screw Design for Foamed Rigid PVC | IE | 1 | January 10, 2005 05:13 PM |
|
|
|
Die design software: Flow 2000 | lily72ca | 1 | January 10, 2005 04:03 PM |
|
|
|
Looking for a Plant Engineer M. E. or E.E. Golden Opportunity | ezrailson | 0 | January 07, 2005 10:49 AM |
|
|
|
CTM RAPRA | Dom | 0 | January 07, 2005 08:11 AM |
|
|
|
Co-extrusion | BrianJ | 3 | January 06, 2005 08:28 AM |
|
|
|
Inconsistent raw material density | DougB | 14 | January 05, 2005 01:20 AM |
|
|
|
instrument for mesuring barrel diameter | gllemoine | 1 | January 04, 2005 09:28 PM |
|
|
|
screw problem | Whistler | 5 | December 30, 2004 01:37 PM |
|
|
|
Any other company make complete recycle systems? | Oyuki | 2 | December 21, 2004 12:58 PM |
|
|
|
4.5" Extruder Surging | jkrue | 8 | December 21, 2004 10:47 AM |
|
|
|
pet sheet extrusion | wvzamora | 3 | December 17, 2004 05:58 PM |
|
|
|
coating on screw | gllemoine | 1 | December 16, 2004 08:44 PM |
|
|
|
recycling pvc | dan mihai | 1 | December 14, 2004 10:35 PM |
|
|
|
Screentek Filtration Systems | smcleod | 4 | December 03, 2004 09:51 AM |
|
|
|
Remove Britleness | shreeprofile | 0 | December 03, 2004 01:31 AM |
|
|
|
Re-Pellitzed Polyethylene | RBaratt | 13 | November 30, 2004 02:36 PM |
|
|
|
vacuum sizing | mitch | 2 | November 28, 2004 05:06 PM |
|
|
|
rigid and flex bonding | cadcamjim | 5 | November 20, 2004 10:34 AM |
|
|
|
Screw and barrel periodic inspections | rdgrnr | 0 | November 19, 2004 03:23 PM |
|
|
|
styrene | inject | 1 | November 18, 2004 04:00 PM |
|
|
|
Anyone Else Work on Uniloy 350R2's? | C@tch22 | 3 | November 18, 2004 02:27 PM |
|
|
|
Extrusion of PVC tubes | Medicalextruder | 12 | November 17, 2004 07:04 PM |
|
|
|
Blowouts | Librazul | 3 | November 17, 2004 06:04 AM |
|
|
|
Look for die designer | lily72ca | 1 | November 16, 2004 08:16 AM |
|
|
|
continous black lines on product surface | lily72ca | 14 | November 12, 2004 03:19 PM |
|
|
|
Die Blankets | RBaratt | 7 | November 01, 2004 03:46 PM |
|
|
|
Extrusion Advice | arasyani | 0 | November 01, 2004 09:43 AM |
|
|
|
soft touch application | marco | 1 | October 28, 2004 01:20 PM |
|
|
|
Die Design | RBaratt | 1 | October 28, 2004 01:11 PM |
|
|
|
PET extrusion | esskayplastics | 9 | October 26, 2004 04:45 AM |
|
|
|
Grooved feed wear | gllemoine | 1 | October 22, 2004 02:58 PM |
|
|
|
Types of screw and barrel treatments | mr_z | 0 | October 22, 2004 04:46 AM |
|
|
|
screw kicking out on rigid PVC | phenolic | 1 | October 20, 2004 02:48 AM |
|
|
|
lifetime of an extruder? | mr_z | 1 | October 18, 2004 03:50 PM |
|
|
|
extruder for Soft PVC | vikmak | 0 | October 16, 2004 01:30 AM |
|
|
|
Extrusion Machine Efficiency | ftaylor | 4 | October 11, 2004 11:24 AM |
|
|
|
Processing Rigid PVC Powder | gbrown@kaf-techmail.com | 4 | October 08, 2004 12:32 AM |
|
|
|
Screw and die design | yori | 3 | September 30, 2004 07:27 PM |
|
|
|
Another groove feed question. | Tom C | 2 | September 30, 2004 07:00 PM |
|
|
|
Info on Screw and Barrels | IE | 10 | September 24, 2004 03:04 PM |
|
|
|
Extruder for thermoplastic elastomer | a2kmoore | 0 | September 15, 2004 09:00 PM |
|
|
|
Extrusion tooling costs | imesayin | 3 | September 08, 2004 09:42 AM |
|
|
|
Groove feed Extruder | ac | 1 | September 02, 2004 02:26 PM |
|
|
|
can Agriculture pipe scrap useful? | shreeprofile | 0 | September 01, 2004 11:16 AM |
|
|
|
please help!!!!!!! | ms. student | 5 | August 24, 2004 05:04 PM |
|
|
|
Coatings for Single Screw Extrusion | hsheth | 2 | August 13, 2004 03:47 PM |
|
|
|
PA66 | kubko99 | 2 | August 13, 2004 07:45 AM |
|
|
|
coating wire | wita01 | 0 | August 11, 2004 01:10 AM |
|
|
|
coating wire | wita01 | 5 | August 11, 2004 12:49 AM |
|
|
|
Need Swing Gate for Killion 1.5 in plastic extruder, please help! | ExtrusionDude | 1 | August 04, 2004 12:42 PM |
|
|
|
Missing Posts | Steve H | 0 | July 27, 2004 03:49 PM |
|
|
|
Reprocessing PS laminated with EVOH/EVA | dh | 3 | July 15, 2004 07:32 PM |
|
|
|
Multi-lumen tubes | Plank | 6 | July 14, 2004 01:50 PM |
|
|
|
what I should check out while giving approval to new extrusion plant | shreeprofile | 3 | July 14, 2004 06:47 AM |
|
|
|
extruder automation: design and fabrication | pcogbonn | 2 | July 12, 2004 06:39 AM |
|
|
|
screw nozzle | Gonnet | 1 | July 07, 2004 03:39 PM |
|
|
|
residence time | msarbandi | 1 | July 05, 2004 07:21 AM |
|
|
|
Carbonate calcium masterbatch production technology | vunguyenhai | 0 | July 05, 2004 02:22 AM |
|
|
|
Barrel zones | dohastne | 2 | July 04, 2004 04:01 PM |
|
|
|
Un melts | miroce | 8 | July 01, 2004 05:10 AM |
|
|
|
Sparkout problem with extruded circuit wire | BSouders | 1 | June 28, 2004 10:17 PM |
|
|
|
Alternate to Anti seize | samin | 2 | June 26, 2004 01:20 PM |
|
|
|
reactive epoxy paste mixing and extruding | tomcorden | 1 | June 25, 2004 09:49 AM |
|
|
|
Exrusion Die Deposit | Ozducati | 15 | June 05, 2004 10:34 AM |
|
|
 |
screw design details for sheet extrusion of HIPS grade of 4 MFI and 97°C Vicat | NILESH | 2 | June 05, 2004 10:11 AM |
|
|
|
Frosting process | hguerrero | 0 | May 27, 2004 01:43 PM |
|
|
|
Mixinf Screw for PLA and contact material | samin | 1 | April 27, 2004 03:42 PM |
|
|
|
Gels | Tom C | 1 | April 25, 2004 09:15 PM |
|
|
|
lumens blocking | mitch | 4 | April 08, 2004 12:06 AM |
|
|
|
Requesting Help | PennCollegeGuy | 2 | April 07, 2004 11:07 PM |
|
|
|
Help about extrusion | extrusion101 | 1 | April 06, 2004 07:31 AM |
|
|
|
screw breakage | felix | 25 | April 05, 2004 10:14 PM |
|
|
|
Charles Chastain | szorn | 2 | April 03, 2004 02:07 AM |
|
|
|
Screw Torque Calculations | Tom C | 9 | April 03, 2004 01:03 AM |
|
|
|
Gear box optimization | Prakash | 1 | April 01, 2004 11:44 AM |
|
|
|
Help Please | marcus | 1 | April 01, 2004 07:17 AM |
|
|
|
Extrusion of Hytrel | Dom | 11 | March 15, 2004 08:56 AM |
|
|
|
Pleassse help!! | werner | 1 | March 10, 2004 06:24 AM |
|
|
|
have a doubt in relationship to the MFI and Extruder parameters: | Rafael | 1 | March 09, 2004 06:59 AM |
|
|
|
Polyflow Extrusion die design | fani | 1 | March 07, 2004 09:22 AM |
|
|
|
pet extrusion | pedro viana | 5 | March 06, 2004 01:44 PM |
|
|
|
Extruder Output | L C | 4 | March 05, 2004 04:00 PM |
|
|
|
Extruder Screens | Steve H | 1 | March 02, 2004 06:36 AM |
|
|
|
Ceramic extruders?please give input!! | werner | 2 | February 28, 2004 06:04 AM |
|
|
|
plastic extrusion screwand barrel clearance | lohen45 | 4 | February 24, 2004 05:46 AM |
|
|
|
new to plastic extrusion.. need general info | sluggo | 12 | February 22, 2004 10:00 PM |
|
|
|
To the experts | cadcamjim | 7 | February 22, 2004 09:24 PM |
|
|
|
Type 6/6 Nylon Tubing | Brendan | 9 | February 21, 2004 09:01 AM |
|
|
|
Sizer design | AJL117 | 3 | February 20, 2004 03:52 PM |
|
|
|
Stringing up line | AJL117 | 0 | February 18, 2004 01:28 PM |
|
|
|
Extruder or Screw&barrel for silicone | plasma | 1 | February 16, 2004 02:10 PM |
|
|
|
need post-extrusion packaging machine | charliehagee | 0 | February 04, 2004 09:02 AM |
|
|
|
extrusion machine | ejeyc | 4 | February 03, 2004 02:07 PM |
|
|
|
Gasketless underwater pelletising | TPEman | 0 | January 28, 2004 10:32 AM |
|
|
|
The History of Extrusion | josh2 | 1 | January 28, 2004 07:05 AM |
|
|
|
Crammer Feeder | Tom C | 6 | January 25, 2004 10:33 PM |
|
|
|
pe. blown film operator training manual | tina.laporte | 5 | January 24, 2004 02:37 PM |
|
|
|
Screw geomentry simulation | T.K.Palanisami | 3 | January 12, 2004 08:32 AM |
|
|
|
Purge Resins | Tom C | 3 | January 09, 2004 11:01 PM |
|
|
|
Seasons Greetings To One And All | Steve H | 2 | December 24, 2003 03:29 AM |
|
|
|
Barrel/Screw Measuring | colbond1 | 2 | December 17, 2003 04:00 PM |
|
|
|
Polyethylene film bad odor | miroce | 14 | December 13, 2003 09:48 PM |
|
|
|
LOSSES | zabielski | 2 | December 13, 2003 09:42 AM |
|
|
|
To the defenders of extrusion as a "Black Art" | Tom C | 3 | December 01, 2003 09:14 PM |
|
|
|
Rupture Disc's | wolfe | 1 | November 27, 2003 01:01 PM |
|
|
|
oil cooling/heting of screw | michael wayne | 9 | November 24, 2003 10:35 AM |
|
|
|
Zenith Gel Pump | Shane O | 2 | November 18, 2003 10:33 PM |
|
|
|
custom sheet extrusion | zuelly | 8 | November 15, 2003 03:11 PM |
|
|
|
Info needed | Christian | 1 | November 09, 2003 05:34 AM |
|
|
|
CPET and chill roll temperature | Lovell | 3 | November 06, 2003 07:48 PM |
|
|
|
Single screw Chain drive | JInman | 16 | October 30, 2003 10:53 PM |
|
|
|
pvc profile tooling requirements ? | cadcamjim | 6 | October 30, 2003 01:42 PM |
|
|
|
Self training docs | duce | 5 | October 25, 2003 01:11 PM |
|
|
|
Abrasive Flow Machining Sources? | dinne | 0 | October 16, 2003 03:33 PM |
|
|
|
Screw Types | jdelmedico | 5 | October 11, 2003 11:46 AM |
|
|
|
How to extruder 5 layer composite tube with thin wall | chenzhiqiang | 5 | October 09, 2003 03:25 PM |
|
|
|
NJ sales tax on dies and molds, modified | senortape | 1 | October 03, 2003 08:45 PM |
|
|
|
NJ sales tax on extrusion tooling? | senortape | 1 | September 29, 2003 02:45 PM |
|
|
|
Quick Change Over Training | Dave Angel | 4 | September 25, 2003 03:58 PM |
|
|
|
Instruction Manual For Parker Zenith zeTROL | Steve H | 0 | September 24, 2003 03:46 AM |
|
|
|
Extrusion Info. | Richard W | 2 | September 23, 2003 04:12 PM |
|
|
|
Friction Tester | Tom C | 3 | September 23, 2003 07:48 AM |
|
|
|
Inline printer recommendation | StrapGod | 1 | September 17, 2003 07:16 AM |
|
|
|
Nanotubes | Arun | 3 | September 16, 2003 09:18 AM |
|
|
|
reply to food extruder | chenzhiqiang | 1 | September 16, 2003 08:07 AM |
|
|
|
Feed screw alterative? | Fauvel | 1 | September 15, 2003 05:44 PM |
|
|
|
Heater band installation | Rick | 2 | September 15, 2003 04:47 PM |
|
|
|
best method to purge color | Ron B | 2 | September 15, 2003 11:15 AM |
|
|
|
Extrusion of PA11 | Marc | 4 | September 15, 2003 06:02 AM |
|
|
|
Food cereals extrusion | malikengg | 3 | September 15, 2003 03:23 AM |
|
|
|
Surging | shelly | 3 | September 13, 2003 05:54 PM |
|
|
|
wide profile styrene extrusion | Walt Murphy | 2 | August 20, 2003 05:07 PM |
|
|
|
Grooved feed zome extruders | sami | 7 | August 18, 2003 09:08 PM |
|
|
|
about PA66/GF30% extrusion fluctuation | chenzhiqiang | 15 | August 18, 2003 09:02 PM |
|
|
|
Compression Ratio | ERIC | 3 | August 14, 2003 06:09 PM |
|
|
|
help me | peter thom | 1 | August 13, 2003 04:45 PM |
|
|
|
Barrel/Screw Clearance | Steve H | 5 | August 11, 2003 09:11 AM |
|
|
|
One piece barrel and feed throat | samin | 8 | August 08, 2003 02:54 PM |
|
|
|
Gels | sami | 23 | August 04, 2003 11:39 AM |
|
|
|
Problems with HIPS recycled | gustavo | 3 | July 30, 2003 02:50 PM |
|
|
|
HOLES IN SHEET | BIGB | 3 | July 25, 2003 02:26 AM |
|
|
|
Cooling PP foam | Sarah | 2 | July 20, 2003 07:39 AM |
|
|
|
Requirement Cooling Feed Cylinder | manishrakheja | 4 | July 18, 2003 07:12 AM |
|
|
|
Pressure not Constant | vivekraj101 | 12 | July 15, 2003 09:05 PM |
|
|
|
Vent blockages! | malikengg | 9 | July 14, 2003 12:48 PM |
|
|
|
problem solving | TomBlack | 4 | July 12, 2003 12:55 PM |
|
|
|
Radius at root of screw | Shroe | 2 | July 06, 2003 09:10 AM |
|
|
|
Liquid injection | goulmik | 3 | July 05, 2003 02:04 PM |
|
|
|
feeding of nylon monofilaments | mahenda | 2 | July 05, 2003 01:59 PM |
|
|
|
Sheet Gauge Variation | Vic | 8 | July 04, 2003 04:35 AM |
|
|
|
mass flow rate of an extruder screw | Aaron C | 1 | July 01, 2003 02:28 PM |
|
|
|
Increase capacity of Blown film Extruders | Subroto Banerji | 1 | June 27, 2003 07:51 AM |
|
|
|
PP/PE blend w/talc | Agata | 2 | June 23, 2003 06:13 AM |
|
|
|
Heater band concerns | mohammadi | 1 | June 22, 2003 12:45 AM |
|
|
|
Screw Design-petg film | anand | 0 | June 21, 2003 08:26 PM |
|
|
|
High moisture content | rusticpixi | 5 | June 21, 2003 06:45 PM |
|
|
|
Die cleaning equipment | senortape | 5 | June 18, 2003 08:07 PM |
|
|
|
Extrusion with water | goulmik | 0 | June 18, 2003 04:29 AM |
|
|
|
Extrusion with very fine powders | goulmik | 0 | June 18, 2003 04:28 AM |
|
|
|
New extrusion machine | goulmik | 0 | June 18, 2003 04:27 AM |
|
|
|
Extrusion behaviour powder/pellet | Jerome | 2 | June 17, 2003 10:58 AM |
|
|
|
Looking for a specific purging material | jason g | 2 | June 13, 2003 06:09 AM |
|
|
|
extrusion problems | jpperezee | 4 | June 13, 2003 06:06 AM |
|
|
|
screw desin for HDPE | billal hussain | 0 | June 11, 2003 05:30 PM |
|
|
|
drive | billal hussain | 3 | June 11, 2003 01:40 PM |
|
|
|
water cooling of pvc extruder | Jeff Uguccini | 3 | June 10, 2003 05:57 PM |
|
|
|
Paper | PETER GILBODY | 1 | June 10, 2003 04:53 PM |
|
|
|
GRINDING and Micro Bubbles | goulmik | 0 | June 10, 2003 08:58 AM |
|
|
|
PCR Curbside PET Source? | StrapGod | 1 | June 08, 2003 01:29 AM |
|
|
|
PET Flake Source? | StrapGod | 0 | June 02, 2003 11:33 PM |
|
|
|
head pressure | gordon | 2 | May 31, 2003 10:43 AM |
|
|
|
heater bands | AJ | 10 | May 28, 2003 08:08 PM |
|
|
|
Screw length | Vic | 8 | May 28, 2003 06:44 PM |
|
|
|
Electrostatic troubles with powder | goulmik | 2 | May 23, 2003 08:29 AM |
|
|
|
Flight thickness/Motor load | felix | 10 | May 16, 2003 08:05 AM |
|
|
|
Sintering?? | jobemay | 2 | May 15, 2003 08:24 AM |
|
|
|
single screw capacity | twbung | 5 | May 04, 2003 09:34 PM |
|
|
|
Barrier screw survey | Tom C | 12 | May 01, 2003 09:00 AM |
|
|
|
extruder borescoping | llynch | 1 | May 01, 2003 08:52 AM |
|
|
|
how to calculate the out put of pvc screw of size 50mm | vikasengg.@vsnl.net | 2 | April 29, 2003 11:28 AM |
|
|
|
Extruder info request | johnt | 2 | April 27, 2003 11:35 AM |
|
|
|
Looking for line equipment - godets, screen changer, extruder, etc | StrapGod | 3 | April 27, 2003 11:32 AM |
|
|
|
Dies, materials of construction | mathieu | 1 | April 26, 2003 08:42 PM |
|
|
|
Cleaning product for our mixers | andy | 0 | April 26, 2003 11:44 AM |
|
|
|
Bag sealing | richardt | 0 | April 26, 2003 11:34 AM |
|
|
|
Die plate cleaning | ali | 0 | April 26, 2003 09:34 AM |
|
|
|
create synthetic grass | simon | 1 | April 23, 2003 06:31 AM |
|
|
|
Screw Wear | Tom C | 12 | April 21, 2003 07:21 AM |
|
|
|
Configuration of stainless steel nip rolls | Ray | 0 | April 12, 2003 11:51 AM |
|
|
|
Extruder and belt dryer information | Brandon | 4 | April 07, 2003 08:47 AM |
|
|
|
Venting gas from extruder | felix | 18 | April 03, 2003 03:57 PM |
|
|
|
Quench tank "Air Gap" breaks - PET extrusion | StrapGod | 5 | March 28, 2003 03:03 PM |
|
|
|
PE/PET Melt temps | Steve-3 | 1 | March 21, 2003 12:35 AM |
|
|
|
How to dimension single screw 120 rpm 70kg/hr | incal99 | 3 | March 19, 2003 12:07 PM |
|
|
|
fish eyes (contanination on PET extrusion) | mitch | 6 | March 15, 2003 09:33 PM |
|
|
|
closures extrusions | gastonb | 0 | March 14, 2003 01:22 PM |
|
|
|
Barrel PSI trouble | pawelkar | 6 | March 12, 2003 06:14 PM |
|
|
|
Need help? | FSD Admin | 13 | March 12, 2003 11:58 AM |
|
|
|
new purging compound | Graziano | 0 | March 10, 2003 03:10 PM |
|
|
|
Need to clean feed screws | LRuiz | 3 | March 10, 2003 08:21 AM |
|
|
|
Water in throat for removing degradation? | StrapGod | 3 | March 08, 2003 09:13 PM |
|
|
|
Production Managers opportunities | ProfileRecruiter | 1 | March 07, 2003 02:03 PM |
|
|
|
Students Needing Assistance | WaterlooStudent | 6 | February 27, 2003 04:57 PM |
|
|
|
Information on Extruder Size versus Temp Profile Wanted | StrapGod | 6 | February 24, 2003 11:17 AM |
|
|
|
HELP extruder design | shubham | 1 | February 21, 2003 06:40 PM |
|
|
|
it's my mistake.this topics for extrudres.. | looperdice | 1 | February 17, 2003 08:53 PM |
|
|
|
Feed throat Problem | Vic | 8 | February 17, 2003 05:14 PM |
|
|
|
Student needs assistance | Mazin | 1 | February 17, 2003 04:33 AM |
|
|
|
pvc tube dies | copyart | 0 | February 16, 2003 05:17 PM |
|
|
|
steps to download the mold from the machine | looperdice | 2 | February 16, 2003 02:05 PM |
|
|
|
Information Needed | melgaali | 0 | February 09, 2003 08:48 PM |
|
|
|
Auger design for bun/bread dough | doughboy | 1 | February 06, 2003 04:19 PM |
|
|
|
Interactive Training Wanted | StrapGod | 5 | February 03, 2003 07:34 PM |
|
|
|
Software to Track Training in Plant | StrapGod | 0 | January 31, 2003 10:20 PM |
|
|
|
Looking Vacuum & Conveying Systems Recommendation | StrapGod | 5 | January 30, 2003 03:54 PM |
|
|
|
acrylamide gel extrusion | Cem | 0 | January 29, 2003 10:31 AM |
|
|
|
Lean Manufacturing - Looking for Info | StrapGod | 3 | January 29, 2003 08:37 AM |
|
|
|
Bimetall protectionb for PTFE HP Extrusion | STAUB Technologie | 3 | January 21, 2003 11:31 AM |
|
|
|
Extrusion - "Intrusion Molding" Processing (January, 2003) Page 34 | zabielski | 4 | January 20, 2003 07:31 AM |
|
|
|
Opinions Of Wayne Machine/Yellow Jacket Extruders? | BrianAndLiz | 0 | January 17, 2003 04:37 PM |
|
|
|
feed screw vs. auger | doughboy | 3 | January 14, 2003 05:43 AM |
|
|
|
MRS | haf | 1 | January 09, 2003 12:23 PM |
|
|
|
SINGLE SCREW PROTO-TYPING | zabielski | 6 | January 05, 2003 07:04 AM |
|
|
|
New Year Wishes | T.K.Palanisami | 1 | January 03, 2003 06:52 AM |
|
|
|
New Year Wishes | T.K.Palanisami | 0 | January 01, 2003 11:30 AM |
|
|
|
Extruder design | shannon | 4 | December 27, 2002 10:02 PM |
|
|
|
Free Purging Compound | Graziano | 0 | December 26, 2002 12:30 PM |
|
|
|
Screen Change Continous Filters | fernando1000 | 7 | December 24, 2002 12:12 PM |
|
|
|
Seasons Greetings | Steve H | 3 | December 24, 2002 11:07 AM |
|
|
|
Best extrusion condition for blown film?? | T.K.Palanisami | 6 | December 20, 2002 09:48 PM |
|
|
|
Best proportion for pvc flexible extrusion? | shreeprofile | 2 | December 14, 2002 01:38 AM |
|
|
|
BLUE SCREWS? | zabielski | 4 | December 12, 2002 06:05 AM |
|
|
|
Prodex Barrel For Sale | rwilson20 | 0 | December 09, 2002 10:10 AM |
|
|
|
Bentonite pellet production | Ngo Chi Thanh | 1 | December 08, 2002 07:52 AM |
|
|
|
Temperature Sensors | L.Moreira | 3 | December 07, 2002 06:09 PM |
|
|
|
Delaimiation of layers in co-extrusion | mitch | 5 | December 07, 2002 06:04 PM |
|
|
|
Trouble shooting in blown film extrusion | T.K.Palanisami | 4 | December 07, 2002 06:01 PM |
|
|
|
HDPE Extrusion speed | ScottSanderson | 0 | November 25, 2002 04:40 PM |
|
|
|
underwater pelletizing (polypropelene) | plumbobr2 | 3 | November 25, 2002 04:33 PM |
|
|
|
extruder head | dragonflymint | 2 | November 24, 2002 07:52 AM |
|
|
|
Mixing screw survey | Tom C | 19 | November 20, 2002 12:01 PM |
|
|
|
Need general extrusion info. | maurico | 2 | November 20, 2002 01:12 AM |
|
|
|
Importance of extruder barrel alignment? | Bob Cunningham | 3 | November 19, 2002 02:15 PM |
|
|
|
Screen Packs | andrewm | 1 | November 17, 2002 08:39 AM |
|
|
|
Temperatures | fernando1000 | 1 | November 16, 2002 10:55 AM |
|
|
|
PVC screw | rvmalik | 1 | November 14, 2002 09:06 AM |
|
|
|
Extruder Bridging Up | dk1 | 13 | November 12, 2002 12:29 PM |
|
|
|
Extrusion Process Information | ohs2000 | 3 | October 27, 2002 06:15 PM |
|
|
|
Extruder needed | James Draffin | 0 | October 23, 2002 11:54 AM |
|
|
|
Appropiate Screw | fernando1000 | 1 | October 23, 2002 04:00 AM |
|
|
|
Warping of 6' Parking Blocks | rharb280 | 7 | October 21, 2002 06:36 PM |
|
|
|
What is the best method to clean a single screw extruder between color changes | dragonflymint | 3 | October 18, 2002 08:17 PM |
|
|
|
problems, need help | Sonja | 4 | October 18, 2002 07:57 PM |
|
|
|
width variation in tubing exiting die | DHeb10302 | 2 | October 18, 2002 07:43 PM |
|
|
|
HELP!!! PLEASE! | mevitts | 14 | October 16, 2002 02:33 AM |
|
|
|
Suggestion needed | gm | 1 | October 07, 2002 11:48 AM |
|
|
|
PPVC shrinks if drawn down too much | griffex | 0 | October 06, 2002 11:09 PM |
|
|
|
PPVC shrinks if drawn down too much | griffex | 0 | October 06, 2002 11:08 PM |
|
|
|
Hydraulic Press for tyre | andy0612 | 1 | September 29, 2002 05:27 PM |
|
|
|
Carbon Filled PTFE Film | PorterM | 0 | September 17, 2002 04:47 PM |
|
|
|
temperature frofile in cooling pe pipes | FID | 0 | September 13, 2002 07:57 AM |
|
|
|
Die Design | rockman1 | 2 | September 12, 2002 02:38 PM |
|
|
|
Acetal Rod | trevorvale | 2 | September 06, 2002 02:42 PM |
|
|
|
Shear Pin Breaks | mitch | 2 | September 06, 2002 02:11 PM |
|
|
|
plastic extrusion | pocho | 2 | September 01, 2002 05:34 AM |
|
|
|
Molecular Orientation | Want2Know | 0 | August 25, 2002 09:22 PM |
|
|
|
surging in poly foam process | marko | 6 | August 23, 2002 06:09 AM |
|
|
|
Resource about extrusion modeling | voznjuk | 2 | August 17, 2002 04:06 PM |
|
|
|
contaminated rpvc | dgomo | 1 | August 16, 2002 04:18 PM |
|
|
|
machine part graphics for education | yori | 1 | August 11, 2002 06:08 PM |
|
|
|
how orientation helpful in quality | vinit | 1 | August 08, 2002 05:51 AM |
|
|
|
Melt Temperature | Robin | 3 | August 05, 2002 04:05 PM |
|
|
|
Shrinkage and warping | chanbros | 8 | July 29, 2002 05:46 AM |
|
|
|
tape line extrusion | arasu | 5 | July 25, 2002 03:43 PM |
|
|
|
pe foam | plumbobr2 | 0 | July 24, 2002 02:00 PM |
|
|
|
What is D.B.L.S. | shreeprofile | 4 | July 24, 2002 02:55 AM |
|
|
|
Screen changers design | start | 3 | July 16, 2002 02:29 PM |
|
|
|
grade of pvc resin for extrusion profile | shreeprofile | 1 | July 09, 2002 10:43 PM |
|
|
|
Barrel/Screw Wear | andrewm | 16 | July 09, 2002 06:26 PM |
|
|
|
Where do I look for new line info? | StrapGod | 3 | July 07, 2002 09:50 PM |
|
|
|
10 key Principles Of Extrusion | Steve H | 0 | July 06, 2002 05:21 PM |
|
|
|
general extrusion information | UWStudent | 2 | July 02, 2002 10:18 PM |
|
|
|
Nigerian Scam Artists | Steve H | 0 | July 02, 2002 03:29 PM |
|
|
|
Motors for extremely large extruders | jbullard | 0 | June 19, 2002 03:02 PM |
|
|
|
Used extruders wanted | austroriego | 0 | June 19, 2002 02:08 PM |
|
|
|
Extrusion - drop in output | sibabrata | 11 | June 16, 2002 02:28 AM |
|
|
|
Single screw design for rigid PVC (powder) | Beto | 7 | June 07, 2002 04:11 AM |
|
|
|
extrude Aluminium dust 90% & 10%ThermoPlastic | sunil | 2 | June 03, 2002 12:45 PM |
|
|
|
feed throat temperature | steve kirchmeier | 1 | May 24, 2002 03:58 AM |
|
|
|
bridging | mitch | 1 | May 24, 2002 03:43 AM |
|
|
|
Die wanted | jmschmbers@aol.com | 1 | May 24, 2002 03:38 AM |
|
|
|
bridging | mitch | 0 | May 21, 2002 06:44 PM |
|
|
|
Infrequent Fish-eyes | DaveCon | 9 | May 01, 2002 05:23 PM |
|
|
|
Polypropylene Extrusion Question | missy-ga | 3 | April 30, 2002 11:35 PM |
|
|
|
Flexiable rubber extrusion | markjameshughes | 0 | April 23, 2002 09:25 AM |
|
|
|
PVC Extrusion Problems | J_BAKER | 1 | April 06, 2002 06:56 PM |
|
|
|
My vendor supplied material is contaminated - what can I do to improve? | Brian | 7 | March 16, 2002 10:47 AM |
|
|
|
Extruding a Peek rod..... | temtek | 0 | March 14, 2002 10:28 AM |
|
|
|
recycling by agglomeration system | Juan Giraldo | 0 | March 13, 2002 04:56 PM |
|
|
|
Screw Geometry | rljagadish | 0 | February 20, 2002 09:42 AM |
|
|
|
extrusion screws manufacturers | plastictubes | 0 | February 08, 2002 06:48 PM |
|
|
|
Cleaning | Joe | 2 | February 01, 2002 11:27 AM |
|
|
|
finding prints and specks | jack | 2 | January 28, 2002 03:28 PM |
|
|
|
Melt Pressure | Joe | 3 | January 11, 2002 02:40 AM |
|
|
|
help needed with extrusion | confused design student | 3 | January 05, 2002 09:44 PM |
|
|
|
Heating temps for ABS | nuts | 3 | October 10, 2001 02:17 PM |
|
|
|
Use an extruder for fractionation | Dominic Marcotte | 4 | October 10, 2001 02:05 PM |
|
|
|
Silicone-Based Processing Aid | JeffdlS | 3 | August 24, 2001 09:14 PM |
|
|
|
Material out of vent | wiseguynj | 3 | July 01, 2001 06:32 PM |
|
|
|
Screw cooling | bettyb | 4 | July 01, 2001 06:01 PM |
|
|
|
Surging | extman | 4 | July 01, 2001 05:34 PM |
|
|
|
Black Specs | twinkler | 4 | June 29, 2001 02:17 PM |
|
|
|
Basics of extrusion/compounding? | CSimpson | 6 | June 22, 2001 05:56 PM |
|
|
|
Bubble Trouble | Jward | 3 | June 21, 2001 03:14 PM |
|
|
|
Multi purpose design | Flemming | 2 | June 21, 2001 09:46 AM |
|
|
|
Crammer screws | milken44 | 1 | June 20, 2001 09:37 AM |
|
|
|
Barrel inspections | beancounter | 2 | June 18, 2001 10:13 AM |
|
|
|
Feed screw simulation programs | Rudder | 2 | June 13, 2001 09:03 AM |
|
|
|
Barrier screws | feyb1 | 3 | June 11, 2001 11:28 PM |
|
|
|
Extrusion Troubleshooting | closkey | 6 | June 11, 2001 06:29 PM |
|
|
|
Barrier Undercut Tolerance | JeffdlS | 1 | June 11, 2001 05:53 AM |
|
|
|
Screw output | Wayfast | 2 | June 06, 2001 09:07 PM |
|
|
|
Gels | plasticman | 3 | June 06, 2001 08:58 PM |
| All times are ET (US). | ||||
An Open Thread ( More than 5 replies). A Closed thread - no new replies accepted.
|
||||
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board Version 5.45a
