Crammer screws - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Ask the experts! These processors and consultants have been there and done that. Post your enigma now!

Crammer screws

Author

Topic: Crammer screws

milken44
Member

Posts: 1
From:
Registered: Jun 2001

posted June 15, 2001 07:06 PM

Is there ever any reason or benefit to use this setup other than for powder applications.

JeffdlS
Senior Member

Posts: 10
From:Grand Prairie, TX, USA
Registered: Jun 2001

posted June 20, 2001 09:37 AM

Actually, yes, this can be used for applications other than powder. It can be used for reclaimed film, or fluff, if you will. Hope that helps

Jeff de los Santos

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs