next newest topic | next oldest topic |
Author | Topic: bridging |
mitch Senior Member Posts: 11 |
posted May 21, 2002 06:44 PM
I am having some problems with bridging on a GP screw with Nylon 12. Any suggestions!! Thanks IP: Logged |
Steve H Moderator Posts: 386 |
posted May 24, 2002 03:43 AM
Hi Mitch You could try allowing the throat temp to increase slightly- say 150F. Keeping all your barrel zones above 540F may help. Does the grade you're running have a lubericant added- if not try adding a small amount of zinc stearate. Steve H IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a