next newest topic | next oldest topic |
Author | Topic: Die wanted |
jmschmbers@aol.com Member Posts: 1 |
posted May 22, 2002 09:35 PM
I would like to create a die that would produce a solid continuous form trough the extrusion process using plastic. IP: Logged |
Steve H Moderator Posts: 386 |
posted May 24, 2002 03:38 AM
You'll need a little more information- each type of thermoplastic has specific processing requirements, and Die geometery also. A good book on the subject is: another book that you might find helpful Good luck IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a