UBBFriend: Email This Page to Someone! |
Plastic processing forums for extrusion information and advice and for other feed screw applications.
Extrusion, Single Screw Looking for line equipment - godets, screen changer, extruder, etc
|
next newest topic | next oldest topic |
Author | Topic: Looking for line equipment - godets, screen changer, extruder, etc |
StrapGod Senior Member Posts: 23 |
posted August 03, 2002 09:43 PM
My plant is interested in starting a new line manufacturing polyester sheet used to make plastic strap. What I am looking for is suggestions from fellow plastic-people on equipment manufacturers for items such as heated godets/roll stands , mill rolls, slitting equipment, dryers, extruders (1400+ lbs per hour), dies, and screen changers. I am pretty familiar with this equipment however I am very interested to hear names of companies that you recommend. Thanks so much!!! IP: Logged |
aheadofthegame Member Posts: 3 |
posted August 09, 2002 10:03 PM
Hello Strapgod I currently work in the polyester strapping industry. While I've worked with many different names in the processing business, the most impressive is the current line I work with now. Built by SIMA and Dietze/Shelle this is an Italian built line capable a guaranteed 1600 pph output. Depending on a particular product we can run 6up x 5/8 x .040 strapping at avg speed of 260-285 fpm. While drying is the biggest issue reguarding a high output line such as this, the equipment is top notch and very consistant in maintaining dialed in specifications. IP: Logged |
plastics Senior Member Posts: 15 |
posted April 27, 2003 10:37 AM
Hi Do you wish to manufacture PET polyester stappings by producing sheets and slitting them?Normally methoth is to produce straps in their final width and thickness in single or multihead dies.Can offer complete line for production either for PET sheets or strapping. please get in touch with with final end product requirments and process and we can offer you a quote. regards vijay b
quote: ------------------ IP: Logged |
T.K.Palanisami Senior Member Posts: 26 |
posted April 27, 2003 11:32 AM
Hey Just visit www.polymerlinks.com You will get the entire list of extruder and acessories manufacturers around the world. IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a