next newest topic | next oldest topic |
Author | Topic: Nanotubes |
Arun Member Posts: 1 |
posted August 21, 2003 12:51 PM
Hi, we are doing some research with nanotubes and we need to produces thin sheets of polymers with nanotubes enforced in them. please tell me which kind of equipment i can use to do this. Thanks IP: Logged |
Tom C Moderator Posts: 195 |
posted August 21, 2003 01:02 PM
Contact this person who makes lab sized extruder and can probably help you: Keith Luker Tom Cunningham IP: Logged |
zabielski Senior Member Posts: 226 |
posted August 22, 2003 07:05 AM
I've got a small 1" Killion single screw extruder with cast film capabilities. Contact me @ zsite1@cs.com IP: Logged |
charliehagee Member Posts: 1 |
posted September 16, 2003 09:18 AM
If you want a robust lab system to compound and/or make cast film contact: Wayne Machine 100 Furler Street Totowa, NJ 07512 www.waynemachine.com IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a