reply to food extruder - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Ask the experts! These processors and consultants have been there and done that. Post your enigma now!

UBBFriend: Email This Page to Someone!

Plastic processing forums for extrusion information and advice and for other feed screw applications.

Extrusion, Single Screw

reply to food extruder

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: reply to food extruder

chenzhiqiang
Senior Member

Posts: 14
From:Nanjing, Jiangsu, China
Registered: Jun 2003

posted September 15, 2003 03:21 AM

hi, we have supplied several extrusion lines for food production with twin screw extruder. As far as the different points of design are concerned, mainly the following items should be included: metal selection of extrusion system, post-dealing system and mixing capacity of extrusion system.

IP: Logged

rvmalik
Member

Posts: 3
From:Mumbai, M.S., India
Registered: Nov 2002

posted September 16, 2003 08:07 AM

Hi,

I want to know the following basic information: (For single screw extruder 75mm size):

1) What compression ratio you offer for processing maize flour and potato flour?
2) What output rates you guarantee/hour?
3) What is the material of construction for the screw and barrel.
4) The recommended main motor driving power.
5) The heating load in Kw.
6) What arrangements are maded on the screw and/or barrel for cooling to prevent excessive cooking and gelatinisation.

Upon hearing from you I shall revert back.

Regards

R V Malik

IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs