Ask the experts! These processors and consultants have been there and done that. Post your enigma now!


UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Extrusion, Single Screw
  extrusion machine

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   extrusion machine
ejeyc
Member

Posts: 3
From:toronto, ontario, canada
Registered: Jan 2004

posted January 27, 2004 05:42 PM     Click Here to See the Profile for ejeyc   Click Here to Email ejeyc     Edit/Delete Message   Reply w/Quote
Hello every one, i just need to know what will be the best extrusion machine (top of the line) should i get? any suggestion please. your help would be appriciated.

Thanks,

Edison

IP: Logged

Steve H
Moderator

Posts: 282
From:New Zealand
Registered: Jun 2001

posted January 28, 2004 01:30 PM     Click Here to See the Profile for Steve H   Click Here to Email Steve H     Edit/Delete Message   Reply w/Quote
G'day Edison

Which extrusion process are you looking at, and what materials will you be running.

Steve H

IP: Logged

ejeyc
Member

Posts: 3
From:toronto, ontario, canada
Registered: Jan 2004

posted January 28, 2004 03:46 PM     Click Here to See the Profile for ejeyc   Click Here to Email ejeyc     Edit/Delete Message   Reply w/Quote
i will use rigid vergin matterials (pvc)for this machine.

IP: Logged

Bob Cunningham
Senior Member

Posts: 72
From:Amesbury, Mass
Registered: Nov 2002

posted January 28, 2004 06:59 PM     Click Here to See the Profile for Bob Cunningham   Click Here to Email Bob Cunningham     Edit/Delete Message   Reply w/Quote
Will you be making pipe?

IP: Logged

Steve H
Moderator

Posts: 282
From:New Zealand
Registered: Jun 2001

posted February 03, 2004 02:07 PM     Click Here to See the Profile for Steve H   Click Here to Email Steve H     Edit/Delete Message   Reply w/Quote
Hi Edison

My spam filter deleted your email so I was unable to reply directly. If you are looking at PVC pipe, I'd recommend contacting Skip Thacker, Skip moderates the PVC forum on this site and you'll find his email addy there.

He'll be able to give you better advice on which way you should head on this project.

This link might be of use to you http://www.plasticpipe.org

Steve H

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a