Stringing up line - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Ask the experts! These processors and consultants have been there and done that. Post your enigma now!

Stringing up line

Author

Topic: Stringing up line

AJL117
Member

Posts: 2
From:BINGHAMTON,NY
Registered: Feb 2004

posted February 18, 2004 01:28 PM

I need some advise on stringing up my line at startup.

I'm extruding a Nylon profile and use a wire with hook on the end that runs thru the vacuum tank to the puller.

This process is very hit or miss, is there a better way?

Thank you

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs