extruder for Soft PVC - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Ask the experts! These processors and consultants have been there and done that. Post your enigma now!

UBBFriend: Email This Page to Someone!

Plastic processing forums for extrusion information and advice and for other feed screw applications.

Extrusion, Single Screw

extruder for Soft PVC

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: extruder for Soft PVC

vikmak
Member

Posts: 1
From:India
Registered: Oct 2004

posted October 16, 2004 01:30 AM

Hi, we are a wiring harness manufacturing company in India. We manufacture almost the entire range of components that goes into a wiring harness. Soft PVC tubes/Sleeves are one of them. we are unable to locate a good PVC extruder for the same that can cover the entire range of our product range right from 3mm-30mm with thickness tolerances range +0.07 / -0.05. The process has to be operator independent like with the use for a vacuum bath. can sumone help us on this plz?

IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs