Ask the experts! These processors and consultants have been there and done that. Post your enigma now!


UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Extrusion, Single Screw
  instrument for mesuring barrel diameter

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   instrument for mesuring barrel diameter
gllemoine
Senior Member

Posts: 13
From:St-Hubert, Quebec, Canada
Registered: Jun 2004

posted January 04, 2005 03:35 PM     Click Here to See the Profile for gllemoine   Click Here to Email gllemoine     Edit/Delete Message   Reply w/Quote
Hello,

I would like to know if someone can inform me on a instrument to mesure the inside diameter of an extruder barrel. Also were I can find this kind of instrument.

Thank you

IP: Logged

Tom C
Moderator

Posts: 424
From:Brodheadsville, PA USA
Registered: Jun 2001

posted January 04, 2005 09:28 PM     Click Here to See the Profile for Tom C   Click Here to Email Tom C     Edit/Delete Message   Reply w/Quote
I am a representative for the barrel bore measuremnt devices shown at:
http://www.flitetech.com/measuring.htm

Please write or call.

Tom Cunningham
www.ExtrusionTech.com

570-992-0961

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a