Ask the experts! These processors and consultants have been there and done that. Post your enigma now!


UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Extrusion, Single Screw
  Seek Side by Side Bicompnt Tape Die/Man

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Seek Side by Side Bicompnt Tape Die/Man
BRUSHMAN
Member

Posts: 2
From:Essex Junction, VT, US
Registered: Jan 2005

posted January 28, 2005 12:28 PM     Click Here to See the Profile for BRUSHMAN     Edit/Delete Message   Reply w/Quote
Looking for proven designer of die/manifold for bicomponent tape, tape to be side by side 2 inches wide by 0.050" thick.

IP: Logged

Tom C
Moderator

Posts: 456
From:Brodheadsville, PA USA
Registered: Jun 2001

posted January 29, 2005 09:12 AM     Click Here to See the Profile for Tom C   Click Here to Email Tom C     Edit/Delete Message   Reply w/Quote
If you can't find that proven designer of this type of die, please email.

Tom C

www.ExtrusionTechnicalServices.com

IP: Logged

charliehagee
Senior Member

Posts: 11
From:Scranton, PA
Registered: Sep 2003

posted February 08, 2005 09:44 AM     Click Here to See the Profile for charliehagee     Edit/Delete Message   Reply w/Quote
If you are looking for a special small tape die with multi-layers see this web page http://www.waynemachine.com/fdies.html

quote:
Originally posted by BRUSHMAN:
Looking for proven designer of die/manifold for bicomponent tape, tape to be side by side 2 inches wide by 0.050" thick.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a