| next newest topic | next oldest topic |
| Author | Topic: mixing screws |
|
Dominicanao Member Posts: 2 |
posted February 18, 2005 01:50 PM
   
Hi, I am a student doing a research paper on Mixing screws. could anybody tell me about some good sources were I can find good information on History of mixing screws, dispersive and distributive mixing, 1 and 2 stage screws, and perhaps the most widely used mixing screws? Please help me, I want to get the most on my research. IP: Logged |
|
Tom C Moderator Posts: 465 |
posted February 18, 2005 03:57 PM
Chris Rauwendaal's books on extrusion cover the subject well. ------------------
Tom Cunningham
Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
|
Steve H Moderator Posts: 344 |
posted February 18, 2005 06:13 PM
Dom Welcome to the single screw forum, if you do a "google" for "the madison group" you'll find some PDF's of Chris R's SPE ANTEC papers. Go to the SPE website www.4spe.org and check out the papers on this subject at the various ANTEC's, you'll have to either join SPE, or pay a fee per paper to download them, but you can read a summary of each paper. ------------------ If at first you don't succeed, skydiving is not for you. IP: Logged |
|
Dominicanao Member Posts: 2 |
posted February 19, 2005 09:23 AM
Hey thanks you guys, this is really improving my research, I appretiate it. IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
  |
|
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
