next newest topic | next oldest topic |
Author | Topic: PET Slip Agent "WaNtEd" urgent! |
Polymer Guy Member Posts: 3 |
posted March 20, 2005 06:53 AM
Dear Sir, How are you? I am looking for additives "Slip agent" to improve the surface of PET bottle or sheet (lubrication). the answer is very important for me. also i need more information about this subject. Regard IP: Logged |
Tom C Moderator Posts: 514 |
posted March 20, 2005 09:05 AM
Try this site: http://www.specialchem4polymers.com/index.aspx ------------------
Tom Cunningham
Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
Steve H Moderator Posts: 353 |
posted March 20, 2005 11:46 PM
PG APET sheet is run through a silicon bath after extrusion to give it denesting abilities. Steve IP: Logged |
Polymer Guy Member Posts: 3 |
posted March 27, 2005 03:24 PM
Thank you my friends Tom C ... Thank you for yhe useful link ... It was general ... no specific talk about PET. Steve H, I appreciate your reply ... silicon bath is after the process ... I need additives during the injection still waiting your reply Regard IP: Logged |
jackie Senior Member Posts: 6 |
posted May 11, 2005 09:51 AM
We use a Clarient anti block in our co extruded Pet sheet to aid denesting. It is called CESA BLOCK 1501 and we put in at 2% of the co-ex layer. IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a