next newest topic | next oldest topic |
Author | Topic: Screw design |
egardezi77 Member Posts: 2 |
posted March 22, 2005 02:09 AM
hi, I am looking for single screw extruder's "Screw-design/screw geometry" for the production of wood plastic composites i.e I will be converting wood filled pallets(resin)into profiles.we are looking into a production capacity of 250kgs per hour. thankyou IP: Logged |
Tom C Moderator Posts: 493 |
posted March 22, 2005 09:01 AM
Alig, Screw designs can be classifed these three ways; 1) Does not work for your material From the limited information you have provided it is impossible to fit any particular screw design in any of the above categories. Please provide a lot more detail. ------------------
Tom Cunningham
Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
egardezi77 Member Posts: 2 |
posted April 01, 2005 12:14 AM
hi tom Thanks for your reply, I would like to know what are the specifications which are required by screw designers so that they could recommend the best design for a particular application. IP: Logged |
Tom C Moderator Posts: 493 |
posted April 01, 2005 11:16 AM
These items influence the screw design; Extruder screw diamter and other detils depending on the project. ------------------
Tom Cunningham
Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a