UBBFriend: Email This Page to Someone! |
Plastic processing forums for extrusion information and advice and for other feed screw applications.
Extrusion, Single Screw Calcium Carbonate /talc in PP flat tape for making ropes
|
next newest topic | next oldest topic |
Author | Topic: Calcium Carbonate /talc in PP flat tape for making ropes |
esskayplastics Member Posts: 4 |
posted January 05, 2006 11:22 PM
what should be the maximum percentage added of these fillers so that there is no appreciable loss in tensile strength and other properties of the PP tape and also whcih wont damage screw and barrel? IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a