Author
|
Topic: PVC Extusion
|
calbear Member Posts: 1 From:Calgary,Alberta Canada Registered: Mar 2004
|
posted March 11, 2004 12:23 PM
We are designing a mobile extrusion system that would be 2700ft from the supply truck. This unit would extrude PVC in place. I need to heat the PVC at the extruder head,space is limited,6.5 ft in lenght. Cooling not a problem.sPVC supplied by air, metering as to be done at the extruder also.All hoses are bundled on a reel. no man access to work area, all controls will be in the truck unit. Cameras and senors on board. IP: Logged |
2beeps Moderator Posts: 71 From:Silver City, NM, USA Registered: Jun 2001
|
posted March 11, 2004 05:54 PM
Calbear,An interesting concept, to say the least!What type of PVC will be extruded---rigid,flexible,powder,pellets? Assume you'll have electric to power the extruder as well as the heater bands. What's your specific question? Skip IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|