Author
|
Topic: uPVC Rigid pipe die leakage
|
plastbm Member Posts: 1 From:Blantyre, Malawi Registered: May 2006
|
posted May 11, 2006 04:19 AM
Hello,I wnated to find out if i'm doing someting seriously wrong when producing small bore uPVC ppes with wall thicknesses of less than 2.5mm. We are experiencing significant material leakage from the die pin retaining ring mounting. Regards, BM IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|