Chill Roller vs Water Quench Tank for PP Cast Film Extrusion - Plastic processing forums for extrusion information and advice and for other feed screw applications.

UBBFriend: Email This Page to Someone!

Plastic processing forums for extrusion information and advice and for other feed screw applications.

Sheet

Chill Roller vs Water Quench Tank for PP Cast Film Extrusion

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: Chill Roller vs Water Quench Tank for PP Cast Film Extrusion

mr_z
Senior Member

Posts: 6
From:
Registered: Oct 2004

posted March 22, 2005 11:41 AM

Dear List,

Would you please share your experience on pros and cons of chill roll and water quench tank for PP cast film extrusion. What are the advantage s and the disadvatages of the two methods over the other.

How the cooling method of PP effects over the elongation rate, tensile strength etc.

Thanks m@z 050322

IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs