Author
|
Topic: Remco Boersma
|
Remco Boersma Member Posts: 1 From:Leiden, Holland Registered: Jan 2005
|
posted January 11, 2005 06:15 PM
For a university course I'm taking, I'd like to know if there is a supplier of extruders or a production company who is capable of extruding a u-shaped Lignocel (or Conex)/ HDPE blend profile with the following dimensions:500 mm high, 300 mm wide and a wall thickness of 10 mm [This message has been edited by Remco Boersma (edited January 11, 2005).] IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|