Posts: 330
From:New Zealand
Registered: Jun 2001

posted December 21, 2001 12:56 PM               

---

We're looking at granulating film/ T'formed waste- the materialis a LDPE/LLDPE blend about 100-180 micron in gauge. The scrap
will be a mixture of cut sheet (610*1000mm) and malformed articles.
Quantities per hour would not be huge, 80-150KG/HR.

What sort of characteristics should we be looking for in a granulator,
ie Number of fixed blades, rotor/moving blade configuration, water cooling
Motor HP etc.

Steve H

IP: Logged

Posts: 40
From:S&M Molding WebsterNew York
Registered: Nov 2002

posted November 14, 2002 02:18 PM               

---

A bit late, but we recomend the IRWIN Chesaw from Irwin Research.

IP: Logged

Posts: 2
From:Bulgaria
Registered: Nov 2004

posted December 10, 2004 08:19 PM               

---

for LDPE scrap we use 30 kW agglomerator machine - 120 kg. per hour, 5000 $

IP: Logged

All times are ET (US)