Author
|
Topic: bubble thickness
|
ahmedgheith Member Posts: 1 From:egypt Registered: Mar 2002
|
posted March 06, 2002 07:04 AM
I’d like to measure the thickness of the bubble of blown film extrusion Does any one know which type of sensors can perform that operation (laser, gamma ,infrared,etc) if so what companies supply these sensors
IP: Logged |
Steve H Moderator Posts: 170 From:New Zealand Registered: Jun 2001
|
posted March 14, 2002 02:59 PM
Have a look at NDC's web site http://www.ndcinfrared.com/applications/web/extrusionarticles/extrusionarticles.html There are other companies supplying this type of equipment. Steve H IP: Logged |
iant Member Posts: 1 From:uk Registered: May 2003
|
posted May 09, 2003 09:24 AM
the best kit i have found for this is plas-control (system type ACS 1100 ON LINE PROFILE MEASUREMENT SYSTEMIP: Logged |
zabielski Senior Member Posts: 138 From:McHenry, IL USA Registered: Nov 2002
|
posted May 10, 2003 08:35 AM
The best system I've ever worked with was from NDC, and when you compare prices, ergonomics, and the best bang for your buck, I think you'll eventually select a truly user friendly system - from NDC.IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|