Author
|
Topic: LLDPE mix with HDPE
|
zarko Member Posts: 1 From:Bulgaria Registered: Nov 2004
|
posted November 07, 2004 07:19 AM
Hi, for production of HDPE t-shirt bags we mix a few % of LLDPE. Is this helpful to lessen the wearing of the screw and barrel, and what is the most appropriate % of mix to improve on film properties IP: Logged |
Tom C Moderator Posts: 406 From:Brodheadsville, PA USA Registered: Jun 2001
|
posted November 07, 2004 11:22 AM
Zarko,Why do you think the additon of LLDPE reduces screw and barrel wear? Tom C
IP: Logged |
Bob Cunningham Senior Member Posts: 95 From:Amesbury, Mass Registered: Nov 2002
|
posted November 19, 2004 04:51 PM
I have never heard about trying to reduce screw/barrel wear with LDPE. Personally, I don't buy it.I have heard of people putting 5-10% of LDPE in with HMW-HDPE to help film properties, but I have no first-hand information on the optimum blend percentages. -Bob Cunningham IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|