Author
|
Topic: Pressure test durability
|
HMW Member Posts: 1 From:Surabaya, East Java, Indonesia Registered: May 2007
|
posted May 15, 2007 08:15 AM
I'm a newcomer in this field. I have an inquiry of 30 micron LLDPE blown film that will used for soya sauce sachet. The film will be laminated with 12 micron PET. The sachet must withstand pressure 100 kg for 5 minutes. Please advise what resin I should use. Thank youIP: Logged |
Tom C Moderator Posts: 842 From:Brodheadsville, PA USA Registered: Jun 2001
|
posted May 15, 2007 09:55 AM
Pressure would normally be described in units of pascals, kilopascals, megapascals, pound per square inch, or kilograms per square centimeter.These units would give us a better idea of the requirement. ------------------ Best Regards, Tom Cunningham www.ExtrusionTechnicalServices.com IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|