|
Author
|
Topic: Ink over PTFE Surface
|
polymerguy
Senior Member Posts: 13
From:germany
Registered: Nov 2006
|
posted February 22, 2007 01:46 PM
  
Can anyone suggest me a Ink which is temperature Stable over 300 Degree on a PTFE surface Thanks in advance.....
Polymer Guy IP: Logged |
Tom C
Moderator Posts: 822
From:Brodheadsville, PA USA
Registered: Jun 2001
|
posted February 22, 2007 09:57 PM
Sounds like a difficult task. Have you considerd laser marking?
------------------
Best Regards, Tom Cunningham www.ExtrusionTechnicalServices.com IP: Logged |
polymerguy
Senior Member Posts: 13
From:germany
Registered: Nov 2006
|
posted February 23, 2007 12:37 AM
It has to be on a PTFE covered cable with line speed of 20m/min. can we do with Laser marking since i dont have experience with Laser Marking over a cableIP: Logged |
Tom C
Moderator Posts: 822
From:Brodheadsville, PA USA
Registered: Jun 2001
|
posted February 23, 2007 08:41 AM
Check out this link. Mentions cable and PTFE marking.
http://www.spectrumtech.com/brochure/Laser_cable_markers/capris100.pdf Best Regards, Tom Cunningham
www.ExtrusionTechnicalServices.com [This message has been edited by Tom C (edited February 23, 2007).] IP: Logged |
Tom C
Moderator Posts: 822
From:Brodheadsville, PA USA
Registered: Jun 2001
|
posted February 23, 2007 08:52 AM
This just came in to my email;****************New e-Training Course****************
LASER MARKING: Advanced Technologies for Laser Marking of Plastics
********************************************** This e-training presents a 'Total Solution Methodology' to
achieve unprecedented high contrast laser marking results via
engineering of the critical factors: (a) laser-additive material
science, (b) laser equipment and software technology, (c) primary
injection-molding operations, and (d) systems integration.
http://omnexus.com/rd/?rd=42&lr=dom07054&li=1003472 Presenter: Scott Sabreen (SpecialChem Expert)
Attendance Fee: 320 EUR Date : Wednesday, February 28, 2007 Eastern Time, USA: 10 a.m. London Time: 3 p.m. Paris, Madrid, Rome Time: 4 p.m.
Sign up now!! http://omnexus.com/rd/?rd=42&lr=dom07054&li=1003472
------------------
Best Regards, Tom Cunningham www.ExtrusionTechnicalServices.com IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|
