wearing problems in screw elements - Plastic processing forums for extrusion information and advice and for other feed screw applications.

wearing problems in screw elements

Author	Topic: wearing problems in screw elements
malvez Junior Member	posted 10-10-2002 01:26 PM Nowadays we have several wearing problems in our nitrited screw elements of ZSK-170 TSE when we are processing PP whith melt index (MFI) between 0.2 to 0.3 (2.16 Kg @ 230°C). Is anybody whith similar situation? We are thinking to move/change at wear resistant elements, but we are interested in reviewing the configuration too IP: Logged
Peter P Member	posted 10-10-2002 05:34 PM Are you sure you're in the right forum? Why would you be using a twin screw to process PP? Regards, Peter P IP: Logged
FSD Admin Administrator	posted 10-25-2002 12:23 PM CPM-10V Material of choice by at less one segment manufacturer. See link below http://www.crucibleservice.com/eselector/prodbyapp/plastics/cpm10vp.html IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs