UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Extrusion, Twin Screw
  Tip Remover

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Tip Remover
ttim
Junior Member 		posted 10-25-2002 12:19 PM     Click Here to See the Profile for ttim   Click Here to Email ttim     Edit/Delete Message   Reply w/Quote
There a tool available to remove the tips of the screws off ?? Reason - in desperate need of chroming and do not want to destroy or mark them with a pipe wrench.

IP: Logged

FSD Admin
Administrator 		posted 10-25-2002 12:27 PM     Click Here to See the Profile for FSD Admin   Click Here to Email FSD Admin     Edit/Delete Message   Reply w/Quote
Send screw sizes to,
ScrewTipRemovers@feedscrews.com
for pricing and descriptions.

IP: Logged

screwloose
Junior Member 		posted 11-05-2002 09:35 AM     Click Here to See the Profile for screwloose   Click Here to Email screwloose     Edit/Delete Message   Reply w/Quote
We machined flats on the screw tips so that a large adjustable wrench could be applied with soft faces. Doesn't seem to affect processing. We run shear sensitive uPVC sheet. Just use generous radii on everythign and you will not have any hang ups.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a