next newest topic | next oldest topic |
Author | Topic: Twin-screw Extrusion Book? |
donaloriain Senior Member Posts: 7 |
posted May 23, 2003 11:50 AM
Is anyone aware of a good reference textbook for general theory, etc. on twin-screw extrusion and/or compounding. IP: Logged |
zabielski Senior Member Posts: 156 |
posted May 24, 2003 09:16 AM
Yes, "TWIN SCREW EXTRUSION - Technology and Principles" Author is (Dr.) James L. White, from HANSER Publishers. ISBN # is 3-446-15691-7. Ask your local Library to do an intra-library loan, or contact HANSER. In the US, the Distributer is OXFORD UNIVERSITY PRESS. One of the best books I've got. IP: Logged |
2beeps Moderator Posts: 47 |
posted May 25, 2003 10:54 PM
I agree, Jim White's book on twin screw extrusion is very good! In addition,I put together my own, non theoretical,hands-on booklet on twin screw extrusion SPECIFIC to rigid PVC. It includes a "troubleshooting guide" for rigid PVC pipe and profile extrusion problems. This booklet is self-published, and available at near my cost of US $40. Regards, Skip IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a