 UBBFriend: Email This Page to Someone! |
 Plastic processing forums for extrusion information and advice and for other feed screw applications.
 Extrusion, Twin Screw
 help: pvc windows and door profile production
|
| next newest topic | next oldest topic |
| Author | Topic: help: pvc windows and door profile production |
|
charlesokonmah Member Posts: 1 |
posted January 06, 2005 04:24 PM
  
hi, i want to start producing pvc windows and doors profile and also pvc ceiling sheets. what do i do, where should i get the production machines, what will they cost.i want to start on a small scale. IP: Logged |
|
2beeps Moderator Posts: 80 |
posted January 07, 2005 12:28 AM
Try contacting Cincinnati Extrusion, in Vienna Austria----they offer a wide range of conical and parallel twin screw extruders,from small to large, and can also help with downstream needs. IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
  |
|
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
