UBBFriend: Email This Page to Someone! |
Plastic processing forums for extrusion information and advice and for other feed screw applications.
Extrusion, Twin Screw Sr Process Engineer - Job Oppty in Los Angeles area
|
next newest topic | next oldest topic |
Author | Topic: Sr Process Engineer - Job Oppty in Los Angeles area |
barusiec Member Posts: 2 |
posted December 29, 2005 01:31 PM
All - I apologize if this is not the right location or against the forum rules, but I can not find any guidelines about posting job openings so here goes... Rain Bird Corporation is one of the leading irrigation manufacturers in the world. A privately held company founded in 1933, we have over 4,000 product offerings, and have been awarded over 130 patents. Rain Bird is committed to the Intelligent Use of Water. It is our legacy to design and manufacture only those products of the highest value and quality. You will be responsible for a major, high-visibility development project that will require you to: Design, source, and commission extrusion equipment and tooling for irrigation tubing. MINIMUM QUALIFICATIONS: BS in Mechanical or Chemical Engineering DESIRED QUALIFICATIONS: Advanced technical degree. TO APPLY: IP: Logged |
All times are ET (US) | next newest topic | next oldest topic |
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a