Author
|
Topic: Come on in, make yourself at home.
|
FSD Admin Administrator
|
posted 06-25-2001 04:24 PM
Hey it can't be all work and no play, Here a place to see what your buddies have been up to. You know like hows the kids? The dog? Maybe find out where they are working now or if they are going to the next conference etc. You might also want to use the forum for " what ever happened to Bobby Fuller" or whatever. Feel free to also criticize this site here as well, we are constantly striving to make improvements and need your input. By the way, don't ever worry about your posts disappearing, we know the value of this information and you and everyone else will always have access to it.IP: Logged |
Tom C Junior Member
|
posted 06-25-2001 04:35 PM
I hear Simon and Garfunkle in the background, and Dustin Hoffman getting career advice.Tom C @ CCS IP: Logged |
FSD Admin Administrator
|
posted 06-25-2001 05:00 PM
And some other advise and suggestions I might add. IP: Logged |
Steve H Member
|
posted 06-25-2001 08:26 PM
You guys are doing a great job- the forums seem to be well patronized.Steve H IP: Logged |
FSD Admin Administrator
|
posted 06-25-2001 10:58 PM
Thanks, have a suggestions on what are next move should be?IP: Logged |
Steve H Member
|
posted 06-26-2001 03:15 PM
Make sure all the postings are archived- Over the years, there'll be a lot of valuable information posted here.Steve H. IP: Logged |
FSD Admin Administrator
|
posted 06-26-2001 03:41 PM
Will do, job #1.IP: Logged |
2beeps Junior Member
|
posted 06-28-2001 04:43 PM
Hi FSD, Finally found your site! I'll probably lurk and float around awhile if that's OK, catching up on past posts before I jump in---but this site appears to be very well organized and easy to navigate! Along with a couple other sites, I'll be visiting here often! Regards, Skip IP: Logged |
FSD Admin Administrator
|
posted 06-28-2001 05:24 PM
Welcome aboard, glad to have you!IP: Logged |
Steve H Member
|
posted 06-29-2001 01:03 AM
G'day SkipPull up a stool and grab a beer- this place has the makings of a damm fine hang out spot. Steve H. IP: Logged |
2beeps Junior Member
|
posted 06-30-2001 12:40 PM
Many thanks, Steve!Looks like this place is as good as plastics.com----at least for my main interest areas of PVC, twin & single screw extrusion,molding, compounding,formulating, and testing! Regards, Skip Speaking of testing, I just found the smilies legend--and am going to try them here! These are too cool!! IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|