single screw design with double vent barrel - Plastic processing forums for extrusion information and advice and for other feed screw applications.

UBBFriend: Email This Page to Someone!

Plastic processing forums for extrusion information and advice and for other feed screw applications.

Recycling

single screw design with double vent barrel

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: single screw design with double vent barrel

twbung
Member

Posts: 3
From:Kulim,Kedah,Malaysia
Registered: May 2003

posted May 03, 2003 02:47 AM

We are looking for screw & barrel mfg for our single screw extruder , it is for recycling of LDPE / LLDPE / HDPE film scrap with moisture . The present screw is with 1 : 35 ration , 130mm with single vent , we wish to change to double vent. the extruder is original from italy OMP

IP: Logged

TomBlack
Moderator

Posts: 22
From:
Registered: Jul 2002

posted May 29, 2003 07:34 PM

I'ld be happy to help. Please let me know if there is anything I can do...

------------------
Thomas Black
PPS, Inc.

www.ppsincorp.com

IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs