Author
|
Topic: Pet food help please
|
Sasa Member Posts: 1 From:Yugoslavia Registered: Jul 2003
|
posted July 12, 2003 06:17 PM
Hi,Im from Yugoslavia and need help about my extruder.I want to start whit manufacturing a pet food,but extruder that I bought from domestic company is originaly for soy extrusion,but they made for me a preconditioner for steam.Is that enough for manufacturing a pet food?Is there a other diference between soy and pet food extruders,and if it is not,can I prearanged somehow my soy extruder to pet food extruder? Company that made my extruder is new in buissnes whit extruders and first in my country,so they cannot help me.Thanks,and sorry about my english. IP: Logged |
carlosrboada Member Posts: 1 From:Lima, Lima, Perú Registered: May 2004
|
posted May 18, 2004 11:42 AM
Dear Sasa:Your problem is not new. Unfortunatly, I have not idea about the characteristics of your extruder. But, extrusion process is both a science and an art. So, if you have the necesary electrical energy, and your extruder have the posibility of multiple configurations (screw speed, shearlocks, reverse flight screws, cut flight screws,etc) you must combine it to discover the exact configuration for your product. Remember: Every formula have an ideal configuration of the extruder. If you change the added fat, or the moisture, the grindding, etc, the configuration must change for getting a good quality (starch gelatination) product. This is the part of "art". Because getting the right extruder profile is easy if you have experience. Do not worry, insist. I had the same problems when I start. Sincerely Carlos Boada Peru Pd.- Sorry for the english, is not my mothertongue IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|