|
Author
|
Topic: extrusion system for a laboratory
|
progim
Member Posts: 1
From:italy
Registered: Aug 2005
|
posted August 29, 2005 09:55 AM
   
we are working on same project about new feeds for seaculture and we need an extrusion system for our laboratory but we have found only systems for commercial use (too big!!!) wile we need avery small one
CAn you help us?IP: Logged |
2beeps
Moderator Posts: 102
From:Silver City, NM, USA
Registered: Jun 2001
|
posted August 29, 2005 10:05 AM
Yes, try contacting C.W. Brabender in South Hackensack,NJ, or in Duisberg Germany. They offer lab-sized extrusion systems for both plastics AND food applications. In fact their food extruders predate te plastics extruders---back to the 1930's!(called Farinographs)
They have a web site.IP: Logged |
Tom C
Moderator Posts: 664
From:Brodheadsville, PA USA
Registered: Jun 2001
|
posted August 29, 2005 03:27 PM
Check out the extruders on our new site:
www.nanoextrusion.com
------------------
Best Regards, Tom Cunningham Extrusion Technical Services www.ExtrusionTechnicalServices.com IP: Logged |
plastics
Senior Member Posts: 14
From:Bombay,Maharashtra,India
Registered: Apr 2003
|
posted December 19, 2005 01:43 AM
We can offer a small lab extruder,single or twin screw for food processing.Approx cost for a singkle screw line would be US$ 12000.0 for a production of 5 kgs to 10 kgs an hour.For a TSE it would go to US$ 25000.0 or so.please do contactus for further information.regards
vijay boolani
Boolani Engg Corp
quote:
Originally posted by progim:
we are working on same project about new feeds for seaculture and we need an extrusion system for our laboratory but we have found only systems for commercial use (too big!!!) wile we need avery small one
CAn you help us?
------------------
IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|
