Author
|
Topic: I need a clay brick extruder
|
fmartirena Member Posts: 1 From:Santa Clara, Cuba Registered: Mar 2003
|
posted March 12, 2003 03:47 PM
Hello:I need a low output/small size clay brick extruder. I need it for a very small brick production, in the range of 2000 units in a 8 hour journey. The machinery must be as simple as possible. Any information will be highly appreciated Dr. Fernando Martirena Universidad Central de las Villas, Cuba www.ecosur.org IP: Logged |
dbarker Moderator Posts: 3 From:University of Cambridge Registered: Sep 2002
|
posted May 08, 2003 08:41 AM
Dr. Martirena, Have a look at this site below, this may be a possibility for what you are after. Handles from 20 to 175 lbs per batch, with 5-15 minutes processing time. http://www.peterpugger.com/pugmill-extruder/pugmill-uses.html Just an idea anyway to get you rolling. Cheers, Dean. IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|