Author
|
Topic: Optical quality polycarbonate mouldings
|
Charles Goldman Junior Member Posts: 2 From:Cape Town, South Africa Registered: Sep 2002
|
posted November 28, 2002 04:52 AM
We would like to mould automotive headlight lenses but are concerned about black spek formation on screw root. What are best practices to minimise the occurence of this problem? e.g. how does one reduce melt adhesion to screw surface (leads to oxidation eventually)IP: Logged |
T.K.Palanisami Junior Member Posts: 3 From:Aalen, Germany Registered: Nov 2002
|
posted November 28, 2002 05:15 AM
Hi CharlesLook in the following link you can find the very good information about polycarbonate processing. http://plastics.bayer.de/pdf/A1145E.PDF Go to this link also you will find so much information about polycarbonate processing http://plastics.bayer.de/AG/AE/technology/inject/index.jsp I hope this information will be useful for you. Regards T.K.Palanisami
IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
Ask the experts! These processors and consultants have been there and done that. Post your enigma now! |