UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Injection Molding, Thermoplastic
  Standard injection shot stroke?

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Standard injection shot stroke?
Philco
Senior Member

Posts: 5
From:Canada
Registered: May 2003

posted December 13, 2004 10:51 AM     Click Here to See the Profile for Philco   Click Here to Email Philco     Edit/Delete Message   Reply w/Quote
Does somebody know if it have a standard for the stroke of an injector? I know that on our machine, it have something like one foot, but I would like to know what's the most popular stroke lenght.

Thanx!

IP: Logged

billal hussain
Member

Posts: 3
From:karachi,sindh,Pakistan
Registered: Jun 2003

posted January 13, 2005 02:41 PM     Click Here to See the Profile for billal hussain   Click Here to Email billal hussain     Edit/Delete Message   Reply w/Quote
there is is no standard. it all depends on different sizes , capacities and different models of different machine manufacturers.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a

Ask the experts! These processors and consultants have been there and done that. Post your enigma now!