UBBFriend: Email This Page to Someone!
  Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Contrete/Cement/Brick /Tile & Asphalt
  Extruder Needed For Recycledd Crumb Rubber

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Extruder Needed For Recycledd Crumb Rubber
kenromig
Member

Posts: 1
From:IL. USA
Registered: Dec 2002

posted December 11, 2002 11:29 AM     Click Here to See the Profile for kenromig   Click Here to Email kenromig     Edit/Delete Message   Reply w/Quote
What products do you make: recycled crumb rubber in various blends of asphaltic oil and limestone aggregate, formed into tiles as big as 36" X 72" X 1.25" thick.
Who is the manufacturer of the machine: Currently we are doing it manually.
Comments: We process at 300F, 20% liquid. Fairly difficult to shovel. I'd like to run 10,000 lbs. / hour.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a