Posts: 1
From:USA
Registered: Apr 2003

posted April 12, 2003 12:19 PM               

---

I am a representative for a company that markets synthetic fibers for concrete. The fibers are 1-1/2" polypropylene and I have a client that is trying to dispense them into a static mixing system for low volume concrete mixing. I was wondering if there might be a manufacturer of a 4" to 6" auger assembly with a couple of cubic foot hopper. The auger only needs to be a foot or two long and the drive end should have the ability to be fitted with a small hydraulic motor. Any help is appreciated.

IP: Logged

Posts: 2
From:Woodway, TX, United States
Registered: Mar 2004

posted March 25, 2004 01:32 PM               

---

Go to MartinSprocket.com. They have a conveyor division. Ask for Don Gerry. 1-800-872-8665

IP: Logged

All times are ET (US)