Auger question - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Augers

Auger question

Author	Topic: Auger question
Keith Member Posts: 1 From: Registered: Apr 2003	posted April 26, 2003 11:57 AM I have an 8" unloading auger coming out of my dryer bin and the motor runs at 1725 rpm w a 2 1/4"drive pulley and has a 12" driven pulley. i want to know if i can use an 8"loading auger and what the pulleys should be for a gas or electric motor to handle it.or if i have to go to a 10" loading auger.. thanks keith IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs