Topic: pvc rigid pipe extruder and downstream electrical troubleshooting
aniruddha Member
Posts: 1 From:india Registered: Aug 2004
posted August 03, 2004 10:26 AM
kindly help on the troubleshooting of pvc rigid pipes theysohn tts-88 and ttm-98 extruder troubleshooting including (elecrical and instrumentation problems) downstream - vacuum tanks, haul off, ipm cutter( tp-250 and 400) and auto socketing machins.
Posts: 351 From:Brodheadsville, PA USA Registered: Jun 2001
posted August 03, 2004 01:54 PM
If you are having instrument and control problems in more than one spot it is possible you are having dirty power problems, shielding or grounding problems. The resolution of these problems involve proper grounding and shielding procedures, and isolation transformers. It is likely you will need to employ ther services of a qualified electrical engineer to resolve your difficulties. Your problems are not unique, and the above mentioned solutions have worked in many extruder installations in the past.
posted August 03, 2004 10:26 AM
