UBBFriend: Email This Page to Someone!
   Plastic processing forums for extrusion information and advice and for other feed screw applications.
  Pipe & Tubing
  pipes extrusion information and methods.

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   pipes extrusion information and methods.
embersi
Senior Member

Posts: 6
From:
Registered: Jun 2005

posted June 06, 2005 03:37 PM     Click Here to See the Profile for embersi   Click Here to Email embersi     Edit/Delete Message   Reply w/Quote
hello, first of all excuse for my very bad english, I'am from argentina, I would like to know where I can find information to mount an pipes extrusion line whose diameter are 1" with an interior wall of 2 millimeters. Especially I would need to make the traction system and the court system.
Thanks
Martin

IP: Logged

embersi
Senior Member

Posts: 6
From:
Registered: Jun 2005

posted June 06, 2005 03:39 PM     Click Here to See the Profile for embersi   Click Here to Email embersi     Edit/Delete Message   Reply w/Quote
Excuseme, I forgot to ask that extrusor type would need as minimum to be able to make these pipes (diameter, capacity, etc).

IP: Logged

Tom C
Moderator

Posts: 544
From:Brodheadsville, PA USA
Registered: Jun 2001

posted June 06, 2005 05:08 PM     Click Here to See the Profile for Tom C   Click Here to Email Tom C     Edit/Delete Message   Reply w/Quote
What type of plastic are you planning on using?

What is the application?

What are your economic constraints?

------------------
Best Regards,

Tom Cunningham

Extrusion Technical Services

www.ExtrusionTechnicalServices.com

IP: Logged

embersi
Senior Member

Posts: 6
From:
Registered: Jun 2005

posted June 13, 2005 10:44 AM     Click Here to See the Profile for embersi   Click Here to Email embersi     Edit/Delete Message   Reply w/Quote
- The type that we think to be used is P.P.
- The application of these pipes will be as insulating in electric facilities.
- We don't still have, but it would be the idea.

I hope it is this to what you referred.

Regards.

IP: Logged

PAWAN POLYMERS
Member

Posts: 4
From:MUMBAI,MAHARASHTRA,INDIA
Registered: May 2005

posted June 22, 2005 05:16 AM     Click Here to See the Profile for PAWAN POLYMERS   Click Here to Email PAWAN POLYMERS     Edit/Delete Message   Reply w/Quote
quote:
Originally posted by embersi:
hello, first of all excuse for my very bad english, I'am from argentina, I would like to know where I can find information to mount an pipes extrusion line whose diameter are 1" with an interior wall of 2 millimeters. Especially I would need to make the traction system and the court system.
Thanks
Martin

WE CAN SUPPLY COMPLETE PLANT FOR PVC BRAIDED HOSE OUTPUT 100KG/HOUR MIN.10 MM DIA MAX 50 MM DIA.WE HAVE SUPPLIED 8 PLANTS & AL ARE WORKING IN INDIA CONTACT PHONE 91 22 20634802
FAX 91 22 28512029 e mail ethelon@gmail.com

IP: Logged

embersi
Senior Member

Posts: 6
From:
Registered: Jun 2005

posted June 23, 2005 12:34 AM     Click Here to See the Profile for embersi   Click Here to Email embersi     Edit/Delete Message   Reply w/Quote
I would like to have that information, but the problem is that I'm in Argentine.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Feed Screw Designs

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a