Author
|
Topic: Custom design extruder wanted
|
Anonymous555 Member Posts: 1 From:Indonesia Registered: Oct 2002
|
posted October 23, 2002 08:36 PM
This posting was done anonymously, however the poster is known to FSD administration and will be provided to any interested party should it be benifical to this inquiry.Wanted screw design complete with barrel, T-dies (60-80 mic), gear box, motor & metal type, etc. than we can make extruder complete from your design. If you can, please quote 2. Need some information about manufacturer that can built 3/4 " single screw extruder like my requirment. I am in Indonesia whare I'll call for extruder manufacturing.
IP: Logged |
allsurplusworld Senior Member Posts: 7 From: Registered: Oct 2003
|
posted October 12, 2003 02:19 AM
Please check out www.allsurplusworld.com/abs, showing details of the equipment of a surplus compounding plant.Also register in www.allsurplusworld.com and we shall keep you informed of buy and sell opportunities. Hans Kwist management@allsurplusworld.com IP: Logged |
charliehagee Senior Member Posts: 13 From:Scranton, PA Registered: Sep 2003
|
posted October 13, 2003 08:52 AM
Contact Wayne Machine www.waynemachine.com and they will be able to help you. email: info@waynemachine.comIP: Logged |
alpertl Senior Member Posts: 41 From:Fremont, CA USA Registered: May 2002
|
posted October 30, 2003 03:17 PM
quote: Originally posted by Anonymous555: This posting was done anonymously, however the poster is known to FSD administration and will be provided to any interested party should it be benifical to this inquiry.Wanted screw design complete with barrel, T-dies (60-80 mic), gear box, motor & metal type, etc. than we can make extruder complete from your design. If you can, please quote 2. Need some information about manufacturer that can built 3/4 " single screw extruder like my requirment. I am in Indonesia whare I'll call for extruder manufacturing.
The best small machines I've seen in years and the most accomodating for needs is American Khune (I've been working with 1/2" to 1 1/2" almost exclusivly for 25 years). http://www.americankuhne.com/
IP: Logged |
simone Member Posts: 3 From: Registered: Aug 2005
|
posted August 22, 2005 11:20 PM
Wich kind of material do you need to extrude? wich production rate? http://www.macgi.com/Extruder-en_18-Chart.htm IP: Logged |
plastics Senior Member Posts: 12 From:Bombay,Maharashtra,India Registered: Apr 2003
|
posted October 19, 2005 09:36 PM
quote: Originally posted by simone: Wich kind of material do you need to extrude? wich production rate? http://www.macgi.com/Extruder-en_18-Chart.htm
Regarding Screw design or complete extruder and take off design we can enter into an arrangment for Indonesia if your are interested.Please contact us. For a small 3/4" extruder to suit your requirment we can offer the same say 20mm screw dia with a 2.25 kw Ac frequency drive,PID temp controls,L/D ratio 24:1 price US$ 6000.0 FOB iNdian sea port.Delivery approx 4 weeks.Please let us know your further interest. regards vijay boolani boolani engg corp bombay-india tel:+91-22-24302826 or 24302790 fax:+91-22-24302790 email: plastics@powersurfer.net or plastic@vsnl.com
------------------
IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|