posted January 23, 2006 03:06 PM            

Husky

Van Dorn

Battenfeld

HPM

Goldstar

---------------------
Husky 3000 Ton Injection Mold Machine

Manufactured: 1998
Hours - 2,800
Specification Features:

Shot Size: 205 oz.
Tie Bar Spacing: 84.6" x 66.9"
Platen Size: 120.1" x 102.4"
Mold Thickness: 39.4"/74.8"
Model: E2700RS135/115
Equipped With:

* Spare screw - 283 oz.
* Robot interface
* Mold cooling package
* High speed package
* 12 Zone Hot Runner
* Cinpress Gas Assist
* SPC/SQC Software package

Can be inspected under power.
Photos on file.

Goldstar 1750 Ton Injection Mold Machine

Serial number: NL11750H8253
Manufactured: 2001
Specification Features:

Shot Size: 252 oz.
Tie Bar Spacing: 63" x 55"
Platen Size: 84.6" x 76.8"
Daylight: 98.4"
Mold Thickness: 31.5"/59.1"
Model: IDE1750HM
Equipped With:

* Barber Coleman Maco 4000 Control
* Dual Hydraulic Core Pull
* Air Blow
* SPI Robot Interface

Van Dorn 1100 Ton Caliber Injection Mold Machine

Manufactured: 1999
Hours 19,000
Specification Features:

Shot Size: 165 oz.
Tie Bar Spacing: 45.27" x 55.1"
Platen Size: 59.5" x 68.9"
Daylight: 94.5"
Clamp Stroke: 74.8"
Mold Thickness: 19.7"/51/2"
Model: Caliber 1100
Equipped With:

* Pathfinder 5000 Control
* Hydraulic clamp
* Hydraulic K.O.
* Core Pull
* High Speed Option
* Robot Interface
* 36" Risers
* Robot

Currently under power.

HPM 1100 Ton Injection Mold Machine

Manufactured: 1998
Specification Features:

Shot Size: 260 oz.
Tie Bar Spacing: 60" x 45"
Platen Size: 79" x 65"
Daylight: 72"
Equipped With:

* Hydraulic K.O.
* Core Pull
* Command 9000 Control

Battenfeld 716 Ton 2-Shot Injection Mold Machine

Hours: 3,062
Specification Features:

Shot Size: 116.7/48.4 oz. Mold Mach
Tie Bar Spacing: 39.37" x 39.37" ach
Platen Size: 55.12" x 55.12" Rot. ach
Clamp Stroke: 70.86" ach
Model: BMT6500/2X6300 ach
Equipped With:

* High base model
* 20 Zone Hot Runner Control - 3kw per zone
* AC Servo screw drive for both injection units
* Corepull to operate mold mounted rotary table
* Corepull for mold mounted lifters
* 5 Additional corepulls with pressure and speed control
* Hydraulic manifold for Moldmaster Valve Gate Control (6 nozzles)
* Hydraulic operated non-operated safety gate

Contact Vince Thompson of Maverick Systems 817-395-2789