Author
|
Topic: Blown Film And Conversion Equipment For Sale
|
Steve H Moderator Posts: 415 From:Christchurch,New Zealand Registered: Jun 2001
|
posted June 30, 2008 03:42 AM
Blown Film Extrusion Lines: Line One Die diameter: 200 mm Rotatating Extruder drive power: 55 kW Air ring : dual lip with Hopper loader: 3 ph with proportional valve Max layflat: 800 mm Tower: Included Winder : dual type Treater : Martigoni 30KHz 320/S2 2004 Material: has been running LLDPE/LDPE blends up to 150 micron Output : 50-70 kg/hr depending on product Manufacturer : MBC (Italy) Price : NZ$110-120,000 Line Two Die diameter: 300 mm Extruder drive power: 40 kW X2 Air ring : Gloucester dual lip with Iris Hopper loader: 3 ph Labotek Max layflat: 1500 mm Tower: Included Winder : Barmag Back to Back dual type No Treater Material: has been running LLDPE/LDPE blends up to 280 micron Output : 50-70 kg/hr depending on product Manufacturer : John Madeley (England) HS500 Co/ex 393 Jan/Feb 1994 Price : NZ$120-130,000 CTS Fountain Blender 600kg Capacity New in 2006 NZ$10,000 Conversion Equipment Two Arvor bag machines, both have servo drives. One is an 95 ASM/2, and the other 1182 GGL NZ$85,000 each (there are various items from a third Arvor that was stripped for spares- haven't tracked the model down yet) BK Dual Shaft Rewinder, will wind up to 1000mm wide web, S/N 000987, good cond $NZ16,000 Carraro Klenia 105 Flexigraphic Printing Press (there are approximately 30 plate rollers of different diameters, along with stands for some) - Offers? SundryItems/Spare Parts Moretto 3 Station Volumetric Dosing/mixing station, 1998 AUX 50-35ST S/N 984772 (there are two of these-brand new and never used as far as I can tell)- Offerss? Air ring, 480/510mm Dual lip, 8 port, no name, has a casting mark C163 on it, tidy cond. Air ring 415/470mm, Dual Lip, 6 port, has casting mark P120 300 3, tidy cond. Air ring 318/350mm, Dual lip, 6 port, good cond Air ring 245/270mm, Dual lip, 4 port, very good cond. Please contact sales@idas.co.nz [This message has been edited by Steve H (edited June 30, 2008).] IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|