Author
|
Topic: Lead Extruder Needed
|
Anonymous Member Posts: 1 From:UK Registered: Dec 2002
|
posted December 11, 2002 09:29 AM
This posting was done anonymously, however the poster is known to FSD administration and will be provided to any interested party should it be benifical to this inquiry. Dear sirs, We buy extruded lead on drums at the moment, but we are looking for a machine that we can buy and do it ourselves.
There are two sizes, ......... 25mm diameter ........... and ................ 19mm diameter, This is extruded onto a 6mm stainless steel wire rope. We buy it by weight .... 1,000 kg per drum, ( 185 mtrs ) but the maximum length we use is 40 mtrs ( 215 kg ) Can you point us in the right direction for an extruder. Very best regards IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|