Author
|
Topic: small runs of high-performance reinforced plastics,
|
Lou Member Posts: 1 From:CT. USA Registered: Jul 2003
|
posted July 19, 2003 11:49 AM
I am looking for an extruder who is willing and able to produce small runs of high-performance reinforced plastics, like glass filled Ultem, and carbon filled PEEK, in rod stock. The quantities needed right now are prototypical, and the larger players (Ensinger, Quadrant, etc.) have larger minimums than can the current projects can support. Can you advise? Thank you.
IP: Logged |
zabielski Senior Member Posts: 328 From:McHenry, IL USA Registered: Nov 2002
|
posted July 20, 2003 07:44 AM
Try B&M Plastics, in Evansville, IN.IP: Logged |
Lanham Plastics Member Posts: 2 From:Chicago, IL Registered: Sep 2004
|
posted September 21, 2004 01:06 PM
You might try one of our suppliers, Garland Manufacturing. They've done glass-filled extrusions for us before, but I don't know if they do anything other than UHMW Polyethylene. http://www.garlandmfg.com/plastics/products.html IP: Logged |
hsheth Member Posts: 3 From: Registered: Aug 2004
|
posted September 23, 2004 07:40 AM
I am currently working with an overseas supplier on screw designs for extruding high perfromance, high temperature materials (all the materials you have listed) for stock shape manufacturing. If you could tell me your requirements I can have them quote you for your job.
IP: Logged |
hsheth Member Posts: 3 From: Registered: Aug 2004
|
posted October 08, 2004 11:41 AM
Hi Lou,Have you found a supplier for the extrusions your are looking for? If not please let me have your contact information as well as your requirements. I am currently working with a profile extrusion compnay who is extruding the materials (speciality in extruding polyacetals and PEEK from Gharda as well as Victrex) you are looking for. Thanks hsheth IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|