Author
|
Topic: Computer Aided Plastic ............
|
Tom C Moderator Posts: 229 From:Brodheadsville, PA USA Registered: Jun 2001
|
posted October 16, 2003 03:39 PM
Please mention to the sponsor that you saw their course listed by Tom Cunningham of Extrusion Technical Services on www.Feedscrews.com Appling Po/E (CAD software) to plastic part design Date: 10/23/03 Ends: 10/24/03 Instructor: Chris Fawcett Location: Cleveland, Ohio, USA Practical Applications for Melt Rheology Workshop Date: 11/13/03 Ends: 11/14/03 Sponsor: SPE Instructor: Pravin L. Shah Location: Fairfield, NJ, USA [This message has been edited by Tom C (edited October 16, 2003).]
[This message has been edited by Tom C (edited October 16, 2003).] IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|