Author
|
Topic: Dry blend processing
|
gbrown@kaf-techmail.com Senior Member Posts: 6 From:Largo,FL,USA Registered: Sep 2004
|
posted January 26, 2005 03:38 PM
Currently evaulating the cost benefit of purchasing PVC in powder form versus pelletized. Flexible, semi rigid, and rigid PVC.Equipment requirements for optimum output and quality. Is twin screw extrusion required even for the flexible material? Would a vented single screw extruder work? What are the down falls in feeding powder and possible contaminents? Any information or reference information would be apprectiated. ------------------
IP: Logged |
Contact Us | Feed Screw Designs
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.45a
|