Sheet winder - Plastic processing forums for extrusion information and advice and for other feed screw applications.

Sheet winder

Author	Topic: Sheet winder
tina.laporte Member Posts: 4 From:london Registered: Jan 2004	posted March 02, 2004 09:06 AM Hi I am lookinbg for a supplier for a sheet winder. It needs to be able to wind single wound sheeting and lay flat tubing 54" wide. can anyone reccomend a supplier for a new or second hand one thanks Tina tina IP: Logged
Bob Cunningham Senior Member Posts: 77 From:Amesbury, Mass Registered: Nov 2002	posted March 03, 2004 11:09 AM Is this for a thermoforming sheet? What sort of tubing will you be winding? Typically "tubing" is more like a blown film application... -Bob C. IP: Logged
tina.laporte Member Posts: 4 From:london Registered: Jan 2004	posted March 03, 2004 11:13 AM Hi Sorry its for LDPE blown film. What i mean by single wound sheet is the ability to edge trim the layflat tubing and then take one sheet to each roller. thanks tina IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Feed Screw Designs